So these side by side couplers look pretty badass

[Silveragent]

... but it makes me sad that they are only good for 5 round changes.

They do swap really fast though! Not sure if it justifies the extra weight.

Yea I know you can fit LAR-15s into them but that seems like a waste of a bottom mag just so they can fit into the coupler.

These are the MC16N from CAA couplers bought from SFRC.

 

[OldDirtyGatMasta]

Those are pretty cool. I might grab a couple for my pinned mags.

I'm still working on my H shaped coupler that holds 4 LAR 15 mags together, just been working on other designs recently.

 

[Silveragent]

i would be very interested to see that come to fruition.

 

[No_Use_]

I just got a magpul maglink... great piece if you got the magpul pmag30

 

[Silveragent]

I just came across these.. where did you get your Maglink? I have plenty Pmags

 

[Big_Red]

Looks very bulky compared to other options.

 

[No_Use_]

I just came across these.. where did you get your Maglink? I have plenty Pmags

Ebay two weeks ago!

 

[Silveragent]

Looks very bulky compared to other options.

What are the other less-bulky options?

 

[forbes/hutton]

A little too tac-gucci for me.

One up, one down, duct taped side to side.

 

[Silveragent]

Ebay two weeks ago!

Okay looking around and found a couple other interesting cheaper options..

The Magpul ones I've found on ebay do not ship north

 

[Armedsask]

I'm still working on my H shaped coupler that holds 4 LAR 15 mags together, just been working on other designs recently.

What's there two work on? Take a regular LAR coupler, drill two holes, bolt two couplers side by side with a space.

You're welcome, send royalty cheques.

 

[dweenz]

couldnt you just couple the 2 lar mags using the endplate coupler and then use a standard h coupler ?

 

[Kampfhamster]

Depends on what you're using your rifle for.

I found coupled magazines rather too big to be of much practical use (for me)

 

[Silveragent]

couldnt you just couple the 2 lar mags using the endplate coupler and then use a standard h coupler ?

The LARs practically disappear into the magwell. There's about maybe a half inch protruding. I don't really know if I've seen an endplate coupler. I should look that up.

 

[mudmaker]

Got my magpul mag links from brownells and had them within a week

 

[dweenz]

ah i see so you would need a endplate coupler that was the H coupler but the mags would probably be too flimsy with no mid length support. but maybe an end plate H coupler is the right track. if it could hold the mags sturdy enough.

 

[Silveragent]

I ordered some couplers off eBay and... they are not so good. Here's an example:

Bad plastic snapped after I tightened it too much. Avoid. AC-DJ2.

I ordered two pair so I kept it on the two Pmags you see there so I'll try them out. I was a bit more careful tightening those two.

 

[TDC]

I ordered some couplers off eBay and... they are not so good. Here's an example:

Bad plastic snapped after I tightened it too much. Avoid. AC-DJ2.

I ordered two pair so I kept it on the two Pmags you see there so I'll try them out. I was a bit more careful tightening those two.

Wait, does that sticker say "Made in China"? Who knew...

TDC

 

[Silveragent]

Okay now these are class. These are Maglinks. Probably cost me as much as those ####ty eBay couplers lumped in with my Brownells order.