Some questions about the Savage Axis

Steve.30-06

Steve.30-06

Member
Rating - 0%
0   0   0
Location
Duncan, B.C.
I just recently purchased a Savage Axis XP in .223 Rem, I like the rifle but the stock is so flimsy that I can't stand it. My questions are, if I wanted to reinforce the stock, how would I go
about doing this and would this void the warranty? I am wondering if it would be better to get a Savage 10 or Steven 200 factory stock and try modifying it to fit, or an aftermarket stock
like a Hogue stock or cheaper one so I am not butchering a expensive stock. Can this be done and what stock would be best for this? Has anyone reinforced their stock or adapted a
savage 10 stock to fit the Axis? I would try making one out of wood but I neither have the skill or the shop to do this in.
DSC01193.jpg

I would have bought a Stevens Model 200 or Savage 10 or Remington 700, but they had none in stock chambered in .223 Rem or .308 that was with in my $500 price range, I had more
than that with me , but I was buying a rimfire rifle as well. My purpose for this gun is to shoot paper targets at 200-400 yards.
 
Honestly if this gun is for target shooting then I highly suggest selling the rifle. The gun will hit what your aiming at within reason but if your trying to get decent groups at 200 yards this barrel profile isn't going to do you any favors. If you want to stay within $500 the savage walking varminter is right at that price point, now you have a heavier barrel profile, an accutrigger, and a gun that you will enjoy for a lot longer. The even better option is to save up and get the cheapest heavy barrel 700 (about $650), that way when you want to upgrade there are tons of options available to you. I think it's worth the extra money and time for either option and you'll thank yourself in the long run. just my opinion.
 
I have a 700 sps, same idea as you... Project: I'm really F'in cheap.

As outlined I ground/ sanded out the fore end to float my barrel. Along with an epoxy bedding.

And to help eliminate the flex in the stock, I filled between the webbing with fiber filled bondo.

It did help stiffen the stock.

Personally I don't like the hogue's... Still too muck flex.

Will it void your warranty. More than likely.

I do like the axis packages for an entry level. And there are a few things you can do to them (I'm fairly sure timney makes a trigger, and I love savage because you 'can' replace your own barrel. With the aide of the barrel nut you can set your headspace.)

Just my $0.02
 
bobfortier said:
By all mean, keep it and have fun. Here is my built from an Axis in 223

http://www.canadiangunnutz.com/foru...et-precision-rifle-VERY-GOOD-RESULTS-JULY-7th
Click to expand...

Bobfrontier you have an amazing build there, I wish I could do the same kind of quality work as you, but I don't have the skill or have the place to do that in.

Stick_man said:
I have a 700 sps, same idea as you... Project: I'm really F'in cheap.

As outlined I ground/ sanded out the fore end to float my barrel. Along with an epoxy bedding.

And to help eliminate the flex in the stock, I filled between the webbing with fiber filled bondo.

It did help stiffen the stock.

Personally I don't like the hogue's... Still too muck flex.

Will it void your warranty. More than likely.

I do like the axis packages for an entry level. And there are a few things you can do to them (I'm fairly sure timney makes a trigger, and I love savage because you 'can' replace your own barrel. With the aide of the barrel nut you can set your headspace.)

Just my $0.02
Click to expand...

Stick_man, you and I are the same I also am too cheap, and I don't usually have the cash to spare. I originally went in to get a Stevens model 200 or Remington 700 in .223 but they had none in stock that was close to my price range that still allowed me to buy a .22LR rifle as well. I love the Idea of being able to customize your gun to make it your own unique and cool looking rifle. But looks are one thing if it doesn't shoot good then it not worth a damn. They did have a Weatherby Vanguard Sporter wood stock in .223 for $499.

Shabazz said:
Honestly if this gun is for target shooting then I highly suggest selling the rifle. The gun will hit what your aiming at within reason but if your trying to get decent groups at 200 yards this barrel profile isn't going to do you any favors. If you want to stay within $500 the savage walking varminter is right at that price point, now you have a heavier barrel profile, an accutrigger, and a gun that you will enjoy for a lot longer. The even better option is to save up and get the cheapest heavy barrel 700 (about $650), that way when you want to upgrade there are tons of options available to you. I think it's worth the extra money and time for either option and you'll thank yourself in the long run. just my opinion.
Click to expand...

Shabazz you do make a valid point, I am wondering if I made a mistake by buying this rifle, I shouldn't have been in such a hurry to buy a .223, I didn't want to leave without buy a centerfire rifle. I should have asked if they would order a Stevens 200 for me and pay for it there or a Remington 700. I wonder if its too late to return it, just a thought. I think I have a case of buyer remorse.

Thank you for your time and information -Steve
 
Stick_man said:
I have a 700 sps, same idea as you... Project: I'm really F'in cheap.

As outlined I ground/ sanded out the fore end to float my barrel. Along with an epoxy bedding.

And to help eliminate the flex in the stock, I filled between the webbing with fiber filled bondo.

It did help stiffen the stock.

Personally I don't like the hogue's... Still too muck flex.

Will it void your warranty. More than likely.

I do like the axis packages for an entry level. And there are a few things you can do to them (I'm fairly sure timney makes a trigger, and I love savage because you 'can' replace your own barrel. With the aide of the barrel nut you can set your headspace.)

Just my $0.02
Click to expand...

One of Hogue's options is an aluminum bedding block which extends from the action well up into the barrel channel. NO flex and is a good stock.

You can also spend the bucks and go for a McMillan stock with a heavy barrel later on.
 
If I were to return it and if they had any of these three rifles at there store which would be a better option for a target rifle?
Stevens Model 200 .223 Rem
Savage Model 11 Hunter XP .223 Rem
Weatherby Vanguard Sporter .223 Rem

My project Idea originally was get a Stevens 200 in .223 Rem, however I can still do this project on the three rifles I have picked
that still fit my budget for the gun, but will stretch my budget for parts.
Stock: Bell&Carlson Carbelite rifle stock Olive green with Black spider webs and a Tac Pro cheek rest from Mystic Precision
Trigger: Timney Trigger for Steven/savage rifle or see if a Accutrigger would fit
Scope: as I am not too knowledge able I was going to get a Bushnell or Nikon, Leupold, or something 3-9x40mm or 4-12x40mm
Was eventually going to do more, like new a 20" heavy barrel

I haven't returned the Savage Axis XP, this is just me thinking out loud.:D
 
Given your desire to add aftermarket stuff, go with the Stevens or blind mag Savage. The B&C stocks are blind mags. Of course, bottom metal can be added but that will add to your costs.

We can chat about scopes and other accessories when you firm up the goals you want for this rifle.

Easy project to do...

Jerry
 
I am looking forward to get your help on this rifle project Jerry. I emailed the place I bought it from to inform them about the return, as there policy says you need prior approval for returning firearms, still waiting for a reply, I haven't shot it yet so there should be no problem.
 
uchi said:
ive got one of these thats used for yote hunting, its a little laser beam with cheap ammo. great gun for the price
Click to expand...
Luckily on Vancouver Island I have never seen a Coyote I don't think there are any on the island, have seen wolves and mountain lions. I am using it for target shooting, and wanted to modify it by adding a new stock, trigger, and so on. But the Savage Axis doesn't have any aftermarket stock available. Thanks for the input though.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom