Some Swissarms questions

[Gundoggy]

1. Are the chambers in the Swissarms true 5.56NATO or .223?
2. How do you remove a Kyle Precision optics rail from the swissarms rifles?

 

[Sigismund]

1. 5.56
2. screw it off, look at the gap between the rear sight, and the rail

 

[Armedsask]

2. How do you remove a Kyle Precision optics rail from the swissarms rifles?

1. Loosen the two small set screws on either side of the rail.
2. With a 5/16" wrench, turn the large bolt into the base to disengage it from the rear sight housing.
3. Remove the base by pulling it back towards the rear sight to disengage the front dovetail, and lifting the rear of the base.


It's pretty straight forward.

 

[scotty]

1. Loosen the two small set screws on either side of the rail.
2. With a 5/16" wrench, turn the large bolt into the base to disengage it from the rear sight housing.
3. Remove the base by pulling it back towards the rear sight to disengage the front dovetail, and lifting the rear of the base.


It's pretty straight forward.

or one could say.... pretty straight backwards?