Source for Czech 7.62X45mm ?

4

4b1t

CGN Regular
Rating - 100%
90   0   0
I'm down to a couple of boxes, anyone know of a good source for Czech 7.62X45?

Anyone shooting their VZ52 with reloads?

Any info appreciated.
 
7.62x45 reloads

I shoot Reloads I first tried milsurp what a disapointment wouldn't cycle properly sometime wouldn't even eject. so I went to reloading bought my brass from buffalo arms @ 77.00 per hundred For powder I am using Hogdon 322 @32.5 grains pushing a hornady .308 bullet #3020 I believe This chronies around 2425 F/s the rifle cycles reliably and is now a joy to shoot.
 
joking???

4b1t said:
I'm down to a couple of boxes, anyone know of a good source for Czech 7.62X45?

Anyone shooting their VZ52 with reloads?

Any info appreciated.
Click to expand...

they were so short in use that I am surprised that you had some of them. I think there is no more milsurp ammo in the cal. 7.62 x 45, even in Czech republic.
 
momentalne anonymny said:
they were so short in use that I am surprised that you had some of them. I think there is no more milsurp ammo in the cal. 7.62 x 45, even in Czech republic.
Click to expand...

I had a case of bxn 52, now down to a few boxes. Probably will reload at this point using Stuart52's load, thanks. Who sells dies?

picture3236ok4.jpg
 
A friend of mine got a pile of Berdan primers just so that he could reload his VZ52.

He's been happily doing it for years.

THere are decapping tools available (though probably special order)

D
 
PerversPépère said:
Can't this brass be reformed from a different caliber?
PP.
Click to expand...

Dug out my copy of "The Handloader's Manual of Cartridge Conversions", page 846.

It can be made from 220 Swift, but involves turning down the rim and cutting an extractor groove. I think I'll just buy some Buffalo Arms brass.
 
You must log in or register to reply here.
Back
Top Bottom