Spec ops Stock on a Grizz 8.5

[GRIZZ 8.5]

Hi Guys
Question
If you put a Spec-ops stock on a Grizz 8.5 is it still non-res.
Is the measurement taken from the lowest position that the stock will go?
Would like to get the benifit of the recoil reduction.
Thanks
Caygeon

 

[Foxer]

I think you'd have to "pin" the stock so it didn't collapse anymore. Collapsed i think it's too short, but you can measure it and find the point which is the shortest you can collapse it to and still be legal, and then alter the stock so it cannot close beyond that point. That would keep you legal.

 

[Backwoods]

It will be fine. Mine is 26 3/4 inches overall length...being very conservative with the tape...could legally be 27ish if you were really honest, I just eyeballed it on the shorter side to be sure...easily over 26 inches though...and a great stock for those short guns.

I've run the SpecOps on my Dlask 8.5's for the last few years...basically since they came out with an 8.5.

 

[GRIZZ 8.5]

Thanks for the info guys, Didn't want to order one then find out it's a no-no as per the RMCPers.
Caygeon

 

[Dave_Shotgun]

It's a great stock to have on the Grizzly.