Stag Arms 1R Question

I

Island_Craig

Regular
Rating - 99.1%
113   1   0
Location
Victoria
Good day,

Looking to get some clarification on a rifle I purchased over the EE.

It is a Stag Arms 1R, but has some differences that I am seeing between my rifle and ones both on your website, and searching thru Stag's in general.

It's marked 1/9 .223 on the barrel, and .223 Cal on the lower. Everywhere online they are listed as .223 / 5.56 - Is this an older model, or should it be safe to assume it is 5.56 as well?

Also, did Stag ever put commercial buffer tubes on their rifles? It seems like it's a commercial from the explanations online, but everywhere says Stag only uses Milspec?

Thanks for all the help in advance!
 
Hi,
The rifle is 5.56mm, you can also use 223 of course. Stag Arms has never manufactured commercial receiver extensions. It is milspec or it is not original (*).

*Full disclosure. We special ordered 5 rifles from Stag in 2004 with Olive Drab furniture, there were no milspec OD stocks in existence at that time so commercial extensions were required. Stag sourced them for us, so those 5 carbines came with OD furniture and commercial extensions. Other than those, with four digit serial numbers, there are no Stags with commercial receiver extensions.
 
dangertree said:
Hi,
The rifle is 5.56mm, you can also use 223 of course. Stag Arms has never manufactured commercial receiver extensions. It is milspec or it is not original (*).

*Full disclosure. We special ordered 5 rifles from Stag in 2004 with Olive Drab furniture, there were no milspec OD stocks in existence at that time so commercial extensions were required. Stag sourced them for us, so those 5 carbines came with OD furniture and commercial extensions. Other than those, with four digit serial numbers, there are no Stags with commercial receiver extensions.
Click to expand...

Thank you for letting me know. I wanted to make sure everything was on the up and up.

It has black furniture, and I'm pretty sure is the average run of the mill 1R so I am 99.9% sure that the extension would be mil-spec. Sometimes the graphs online can be misguiding when they detail which is which.

Thx again!
 
I have another question arms-east! I bought a stag upper (stripped) and a stag lower (also stripped) from you guys on separate orders. The lockup is not tight, there is a quite noticeable wobble. Is this normal? (most of my ARs lockup totally solid)

* I finished it with a stag LPK, also purchased from you.

-thanks!
 
eatredmeat157 said:
I have another question arms-east! I bought a stag upper (stripped) and a stag lower (also stripped) from you guys on separate orders. The lockup is not tight, there is a quite noticeable wobble. Is this normal? (most of my ARs lockup totally solid)

* I finished it with a stag LPK, also purchased from you.

-thanks!
Click to expand...

How much wobble are we talking about here? If it is excessive, I'd have to say not normal at all. Can you email me a smart phone video maybe? info@armseast.com If there is something wrong here we will definitely take care of you.
 
Not a crazy amount, but it is not solid. I shoot it and have no problems so I'm not too upset but when I put either of my uppers onto another lower that I have, it is completely solid tight. When I matched the brand for my upper and lower I guess I was expecting that.
 
You must log in or register to reply here.
Back
Top Bottom