Standard case shell holder question

Wookie316

Wookie316

CGN frequent flyer
EE Expired
Rating - 97.8%
45   1   0
Location
East of the line ;)
I have some standard case 9.3x62mm brass & about 1/2 of the lot does not want to fit into a standard shell holder. It is Graf brass & the rim must be a tad thicker.

Which company makes a shell holder with a looser fit? I believe mine is an RCBS. My Lee hand primer will fit the tight cases ok.

I have to make a trip to the city tomorrow & want to pick one up. I will take some of the brass with me to test.

Thanks.
 
I have 2 #4 Lee shellholders for .223 and one has issues with feeding the brass into it while the other does not.

I thought it was the brass that was causing the issue but figured out that it was the shellholder itself.

Try picking up either another of the same brand or try another brand to see if it is the brass or the shellholder causing the issue.
 
My lee #2 is a litte too tight so I tried the RCBS #3 and it was a better fit. Ive also used Lee#3 but it doesnt' center the case as well because its a little loose.

Im using PPU Brass.
 
You must log in or register to reply here.
Back
Top Bottom