Stevens 300F 13" barrel

[Rotaxpower]

Does anyone know were I could order a 13" barrel from the stevens 300f trapper in 22lr?

 

[mmattockx]

If it's like most bolt action rimfire rifles the barrel is pressed into the receiver and not considered a replaceable part. Why are you looking for one?


Mark

 

[lone-wolf]

Last I checked savage won't sell barrels.

 

[dahs]

For the hassle, lots of site sponsors have the entire rifle for $250 ish.

 

[hp9]

The wholesaler that gets this exclusive run manufactured with the Savage facility in Lakefield, ON, does not have access to additional barrels either.

 

[lone-wolf]

Babyseal, iirc, has a rifle in the EE, looks like he did some barrel swapping, and had to buy the whole rifle to do so.

 

[Rotaxpower]

thanks all, I was wanting it for a project, think I will just bite the bullet and buy the complete rifle.

 

[lone-wolf]

What is the project's action? Cause I've seen 10/22 barrels fitted to the savage mrk2 action.

 

[mmattockx]

thanks all, I was wanting it for a project, think I will just bite the bullet and buy the complete rifle.

If you are planning on removing the barrel from the action, be prepared for a serious fight. I changed barrels on an older Savage Mk.II and it was a b!tch to get the old barrel out. Took a couple thousand pounds of force on a press to finally move it.

What is the project's action? Cause I've seen 10/22 barrels fitted to the savage mrk2 action.

Yep, but the barrel tenon on the 10/22 barrel needs to be turned down a bit and the shoulder moved forward to fit the Savage receiver. A 77/22 barrel is a better choice for the Mk.II receiver, it already has the two extractor grooves machined into it and the tenon dimensions are identical to the 10/22.


Mark