Stuck Case - Someone Care to Enlighten Me On What To Do Here?????

[X-fan]

Imperial size wax is a lot more forgiving.
Once you get the brass started put the die back in the press and grab the base of the case with a set of vise grips and let the press do the work.

FWIW
This is just one more reason to own a Forster CO-AX.
The CO-AX will pull a bone dry case...Forster pulled 300 of them while in development.

 

[Eagleye]

I much prefer Imperial sizing wax to any of the spray-on types. Never have I had a stuck case since I started using this stuff [many, many years] Eagleye.

 

[joe-nwt]

i much prefer imperial sizing wax to any of the spray-on types. Never have i had a stuck case since i started using this stuff [many, many years] eagleye.

x2.

 

[hk33ka1]

I used Surplus Rifles way instead of the RCBS kit I couldnt wait for. I havent stuck one since, but if I do I'll use this again. I needed a bolt, drill bit and tap, and I used a socket and washer from my set as a spacer to run the bolt through.

http://www.surplusrifle.com/shooting/shellextractor/index.asp