Suggestion: Base for mounting rings on Brno ZKK 600

[Easygunner90]

Hey guys, I'm wanting to put a new scope on my 30-06 brno zkk600. Probably something with 4.5-14x40. Wanting to know what you guys might have on yours and what you like or dislike about it. Such as brand, fixed or detachable, size, etc. I'm trying to decide what to put on mine. Thanks.

 

[RichardSlinger]

I have millet rings on mine now, they are rubbish.
I'm thinking of getting some talley rings for mine.
Any CZ 550 rings will work on a ZKK

 

[Slimbo]

Warns makes a decent set of rings that mate to your factory dovetails.

 

[farshot]

Cz, Talley, Warnes, Leupold, Lynz...all make 19mm dovetail rings in various sizes.
All are good product.
Make use of the built-in dovetail to avoid a base; it is worth it to do it as designed.

 

[A-zone]

I prefer Warne. Solid, sleek rings!

 

[Easygunner90]

Thanks for the tips. I’ll look into those warns rings. Much appreciated guys.

 

[Mauser98]

I put detachable rings from Alaska Arm LLC on my Brno ZG47. They are also compatible with Brno 6xx’s and CZ 550’s. Very nice solid rings that always return to zero when remounting the scope.

https://alaskaarmsllc.com

 

[geologist]

I have medium (?) BRNO rings with the recoil lug on the rear ring on my 600 mounting a B&L 3x9x40 and it clears the rear sight. The cheek weld is OK and it shoots MOA with factory loads.

 

[Easygunner90]

What are your thoughts on the cz rings with levers?

 

[geologist]

What are your thoughts on the cz rings with levers?

They are Warne maxima medium QDs and they work OK. Zero needs adjusting an inch or so after removing and re-installing.

 

[Easygunner90]

Thanks for the pics. I was wondering if a x40 Lens would clear this rear sights with medium rings. Glad they do.

 

[geologist]

Thanks for the pics. I was wondering if a x40 Lens would clear this rear sights with medium rings. Glad they do.

They might be highs so check if you can. I know that the Warne QDs on the 602 are mediums but the CZ rings on the 600 look higher.

 

[honz]

I have a Zkk600 as well, after some trial and error I found a set of cheap Millet rings do the trick for me for a 30mm scope (Vortex 6.5-18 or whatever it is).

While I don't feel they are super-awesome-totally-gnarly, they don't feel like rubbish either. They're solid, they mounted well and have done the trick for the last 4 years. However, Now that it was mentioned that CZ550 rings should work, I'll try out a pair I picked up in anticipation of scoring a CZ550 in the coming years.

 

[Easygunner90]

Ok I’ll make sure I look into it some more . The cz550’s look like the ones I’m getting set on