T3 Battue setup an explanations video

[WhelanLad]

Hey this covers alot from what I've been posting lately.
Should answer a few Q's on.. why a Battue.. why remove sights, why I sick at shooting and what else.

Cheers guys

 

[DGY]

I made a few comments on your channel…

 

[Meroh]

Hey this covers alot from what I've been posting lately.
Should answer a few Q's on.. why a Battue.. why remove sights, why I sick at shooting and what else.

Cheers guys

The action seems auful tight closing in the video.

 

[WhelanLad]

The action seems auful tight closing in the video.

sure was- i needed to bump the shoulder a bees #### FLS but needed a turn in or so. typically just Neck size the brass

 

[WhelanLad]

I made a few comments on your channel…

i see ya- good observations etc

 

[Meroh]

sure was- i needed to bump the shoulder a bees #### FLS but needed a turn in or so. typically just Neck size the brass

Was that a reload or factory brass?

 

[DGY]

Was that a reload or factory brass?

Reloads.

 

[WhelanLad]

2626 & 2632 fps with higher Load in the rifle

 

[DGY]

2626 & 2632 fps with higher Load in the rifle
View attachment 1115354

That is pretty good enough! If it groups inside 2” that is !

 

[WhelanLad]

That is pretty good enough! If it groups inside 2” that is !

yeah mate, on my estimations- an from ADI data, 46 grains with a 24 inch tube was about 2770...... i had written down 2650 next to it as expected 20 inch speed-
mind you im at 45 grains- not compressed and standard coal- im more than happy with that.

yet to shoot too many groups- i zero'ed it and shot the gong at 220m no dramaaaaaaa.

off hunting tomorow for Rutting Fallow bucks. but might be a week or so early yet..Franchi and co is coming out with me aswell for the night