Tanfoglio goodness! Thanks Freedom Ventures!

[Craig0ry]

I need to buy an extreme firing pin for my Tanfo aswell, Iam currently getting occasional light strikes, I switched to federal primers and I would say ignition is about 98%, but adding the extreme firing pin that should put me at 100% with federal primers, CCI is another story of course.
I added the extreme flat SA trigger and SA delta hammer as well as the light hammer spring and firing pin spring, Polished all the internals not long after I got it when it was still DA/SA, I would say trigger is around 2-2.5lbs now.
Its not as fancy as yours though Triminion

 

[Freedom Ventures]

I need to buy an extreme firing pin for my Tanfo aswell, Iam currently getting occasional light strikes, I switched to federal primers and I would say ignition is about 98%, but adding the extreme firing pin that should put me at 100% with federal primers, CCI is another story of course.

If you want reliable CCI primer hits with the light setup, go with the Xtreme firing Pin and a Xtreme Titan hammer.
Titans hit hard, but have the same sear angle so you get the same trigger pull.
Honestly, I don't know why Tanfoglio still makes the Xtreme Deltas after they came out with the Xtreme Titan...

 

[Freedom Ventures]

I meant to post this sooner but been swamped these few weeks. Thanks to the great folks at Freedom Ventures for getting me my Tanfoglio 2018 Limited Custom and getting me my special order parts in record time and answering my million questions. These guys know their Tanfoglios!

You're very, very welcome, Trinimon - thanks for buying Tanfoglio and for buying through us!

 

[NickVR]

That is gorgeous!

 

[Craig0ry]

If you want reliable CCI primer hits with the light setup, go with the Xtreme firing Pin and a Xtreme Titan hammer.
Titans hit hard, but have the same sear angle so you get the same trigger pull.
Honestly, I don't know why Tanfoglio still makes the Xtreme Deltas after they came out with the Xtreme Titan...

Extreme firing pin is definitely on the list, I will check out the titan hammer as well, the SA Delta hammer was given to me. Next payday of course

 

[Trinimon]

I need to buy an extreme firing pin for my Tanfo aswell, Iam currently getting occasional light strikes, I switched to federal primers and I would say ignition is about 98%, but adding the extreme firing pin that should put me at 100% with federal primers, CCI is another story of course.
I added the extreme flat SA trigger and SA delta hammer as well as the light hammer spring and firing pin spring, Polished all the internals not long after I got it when it was still DA/SA, I would say trigger is around 2-2.5lbs now.
Its not as fancy as yours though Triminion

That's pretty ###y too! I want one of those too in hard chrome. Mmmmm....

Here's a non-scientific test of the Delta vs Titan hammer. FF to the 4min mark.

 

[Trinimon]

If you want reliable CCI primer hits with the light setup, go with the Xtreme firing Pin and a Xtreme Titan hammer.
Titans hit hard, but have the same sear angle so you get the same trigger pull.
Honestly, I don't know why Tanfoglio still makes the Xtreme Deltas after they came out with the Xtreme Titan...

I sense a Titan hammer and an IpscAlex thumb rest order coming in shortly...

 

[Deaus]

I think I may end up getting some Extreme parts too. Gun already shoots so good, I can only imagine what it would feel like after dropping in Extreme parts. I was always leary about it because of Light Strikes but now that I know it shouldnt be a problem with the right Combo of parts.

 

[thatmikeguy]

Gorgeous Pistol!!

 

[sharpee]

While we're on the Freedom has awesome products topic - take a look at my latest purchase from these guys! I've purchased a few STI's from Freedom lately but this DVC is the finest firearm I've ever handled. Thanks to the guys at Freedom for excellent service and for bringing these fine products to market in Canada!

 

[Trinimon]

Hot damn! That's a beauty! Time to start saving pennies and fire sale on guns I haven't shot in a while.

 

[sharpee]

Thanks - can't wait to shoot it! A nice Tanfoglio is on my list too