Well, I had a lot of trouble first getting started and got a lot of feedback from the fellow CGNer's out there.
I put a lot of the suggestions into practice and managed to get groups which look like an appropriate starting points.
I am still looking at experimenting with some 45 grain bullets and perhaps some IMR 4064, but here is where I am at.
Thanks again to all the reloading suggestions and checks I received.
First group is a 50 grain Sierra SPT with 34 grains of varget. Second group is the same bullet with 37 grains of H380, both the minimum loads per the loading book.
With no signs of excess pressure, I will see to start slowing working up these loads and hopefully shrink the group some more.
I put a lot of the suggestions into practice and managed to get groups which look like an appropriate starting points.
I am still looking at experimenting with some 45 grain bullets and perhaps some IMR 4064, but here is where I am at.
Thanks again to all the reloading suggestions and checks I received.
First group is a 50 grain Sierra SPT with 34 grains of varget. Second group is the same bullet with 37 grains of H380, both the minimum loads per the loading book.


With no signs of excess pressure, I will see to start slowing working up these loads and hopefully shrink the group some more.