The Remington Model 32

Cow Town Bill

Regular
Uber Super GunNutz
Rating - 100%
65   0   0
Location
Calgary
I had the opportunity to purchase a Model 32 earlier this year and thought I should share the gun with fellow CGN followers.
There were not a lot of M32's made, less than 6000, and they were made during the period 1932-1942 with a few put together from parts after WW2. In comparison, more than 30,000 Winchester Model 21's were made.
I have seen only one other M32 in my many years of shooting and collecting.
Many of the M32's were target guns, both trap and skeet, and mine is a trap gun, a Model TC, with the T standing for trap and C is the grade. There were a few D, E and F grades but they are very scarce.
My M32 was made towards the end of production in 1940. It has 32" vent rib barrels, choked modified and full. Also, it has a selective single trigger which was highly regarded at the time. Typical of trap guns, it is on the heavy side (a tad over 9 lbs) to help reduce recoil. Most trap guns see a lot of use but this has been spared and remains in very good original condition. I have shot sporting clays with it and, aside from being over choked for most targets, it worked flawlessly.
The M32 was not a financial success for Remington and they sold the rights to the M32 to Krieghoff who modified it a bit and marketed it as the Krieghoff Model 32 and it became highly prized by target shooters. It has been modified again and is now known as the Krieghoff K80.
I look forward to your comments, particularly those who have the good fortune to have a Remington M32.
DSC_0043.jpg
DSC_0037.jpg
 

Attachments

  • DSC_0043.jpg
    DSC_0043.jpg
    64 KB · Views: 336
  • DSC_0037.jpg
    DSC_0037.jpg
    50.9 KB · Views: 334
  • Like
Reactions: Rod
Beautiful gun Bill!
In the top picture the comb appears to slope downward toward the front instead of the usual way toward the back, is this the case or it it just the way it looks in the picture.

You have a keen eye, Falconflyer.
The comb has a reverse slope which was popular with a few top trap shooters many years ago. The idea is to reduce the effects of recoil on the shooters cheek. I suspect it was a fad at that time as this is the only shotgun that I have seen with the reverse slope. When I shot this gun I used 1 oz loads which doesn't generate much recoil in a 9 lb
gun, so really can't say whether the stock reduces felt recoil or not. The gun fits me so I can't complain.
Thanks for your comments.
 
That's a clean looking shotgun, congrats. I know I have the repair manual for one but couldn't say the last time I saw the actual shotgun.
 
A reverse slope comb has been a popular way the reduce cheek slap in heavy recoiling rifles (re Weatherby MkIV stocks) but I've never seen it on a shotgun. Adjustable combs are great for mitigating cheek slap, all you have to do is bring them somewhat parallel to the bore and the slap generally goes away but doing a reverse slope is not normally required.
 
A reverse slope comb has been a popular way the reduce cheek slap in heavy recoiling rifles (re Weatherby MkIV stocks) but I've never seen it on a shotgun. Adjustable combs are great for mitigating cheek slap, all you have to do is bring them somewhat parallel to the bore and the slap generally goes away but doing a reverse slope is not normally required.

The comparison to Weatherby rifles stocks is a good one.
Competition shooters use a wide variety of devices to improve their shooting ie adjustable combs, adjustable ribs, roll over stocks, over sized pistol grips, palm swells etc.
My M32 is about 80 years old and a good example of a fine competition trap gun from that era. I enjoy using for it recreational shotgunning, perhaps even a vintage trap shoot.
Bill
 
This is an E grade that I found on the net. Very nice engraving. Top grade is an F Grade---I'll see if I can find one---originals are really scarce but there were quite a few fancy upgrades.
Remington-Model-32E-Expert_102335769_121797_713DD552F830828F.jpg
Remington-Model-32E-Expert_102335769_121797_A28F70AC577D183E.jpg
 

Attachments

  • Remington-Model-32E-Expert_102335769_121797_713DD552F830828F.jpg
    Remington-Model-32E-Expert_102335769_121797_713DD552F830828F.jpg
    124.7 KB · Views: 116
  • Remington-Model-32E-Expert_102335769_121797_A28F70AC577D183E.jpg
    Remington-Model-32E-Expert_102335769_121797_A28F70AC577D183E.jpg
    42.9 KB · Views: 113
A neighbour @ my cottage has one in Skeet model , with fixed chokes. Excellent condition. He wants $2,000. Is this a fair price ?
 
A neighbour @ my cottage has one in Skeet model , with fixed chokes. Excellent condition. He wants $2,000. Is this a fair price ?

There aren't a lot of M32's on the market. Not surprising as not many were ever made. In excellent condition, his asking price is fair, at least in my opinion. Target guns, albeit Trap or Skeet, tend to see a lot of use, and sometimes abuse, and as such those that have been tucked away in a closet for many years attract the attention of collectors.
 
I managed to find a F Grade on the net and 2 pics are attached. This gun doesn't have gold inlays but the engraving is superb and I'm sure ranks in there with the best engraving Winchester ever produced. Winchester collectors might dispute my claim and that would be the subject of an interesting discussion.

wm_15362375 M32F1.jpg
wm_15362386 M32F2.jpg
 

Attachments

  • wm_15362375 M32F1.jpg
    wm_15362375 M32F1.jpg
    58.3 KB · Views: 87
  • wm_15362386 M32F2.jpg
    wm_15362386 M32F2.jpg
    22.6 KB · Views: 85
I managed to find a F Grade on the net and 2 pics are attached. This gun doesn't have gold inlays but the engraving is superb and I'm sure ranks in there with the best engraving Winchester ever produced. Winchester collectors might dispute my claim and that would be the subject of an interesting discussion.

View attachment 720273

Very nice!
- Just thinking outloud, but isn't just me, or American gun makers never really showed any interest in scallop receivers?
 
I like how they took the time to jewel parts inside of the action.

I had a medium quality F W Heym 16 ga they had jewelled on the inside surfaces. And some of the parts were gold washed. I ended up selling the gun to VictoryXC here but it started my enthusiasm for German guns.
 
I had a medium quality F W Heym 16 ga they had jewelled on the inside surfaces. And some of the parts were gold washed. I ended up selling the gun to VictoryXC here but it started my enthusiasm for German guns.

Not many guns have the innards fancied up. The locks on most English best quality sidelocks have no embellishment at all. Guns like your Heym are rather rare in my experience, but I really don't much about German guns.
I attach a pic of the trigger from one of my Perazzi's. It's a long ways off a top grade Perazzi; nevertheless, it certainly is attractive.

DSC_0014.jpg
 

Attachments

  • DSC_0014.jpg
    DSC_0014.jpg
    68.6 KB · Views: 53
Back
Top Bottom