Tikka t3 trigger recommendations

crowellsr

CGN Regular
Rating - 100%
30   0   0
I'm in the planning stages of a 6mmbr build based off of a tikka action. I swapped out the factory tikka trigger spring for a yodave and it dropped the pull to 23 ounces. Ideally I like my triggers to be 12-16 ounces. I'm looking for recommendations on how to achieve this or replacement triggers that will get me closer to this.
 
The thread also mentions the Timney, KRG and Bix n Andy triggers. Every option available to us Tikka owners were mentioned in that thread. The low reply count in that thread suggests that very few people here go further than a spring swap.
A quick Google search shows that the Timney can be easily adjusted to 8oz+8oz pull weight, maybe start there if your YoDave can't do better than 1.5lbs.
 
Yeah it seems to be discussing the factory set triggers and a yodave trigger kit but thanks for jumping down my throat on that

Quit taking up all the bandwidth on this gun forum with gun questions :)

Please let us know how your 6BR build goes. I’m planning one as well, and it seems like a tikka with an mdt aics 6br mag is the cheapest most direct route to get one to feed without a fancy custom action.
 
Wait till a Trigger Tech comes out with a Tikka. That’s what I’m doing.. should be soon, not sure why they came out with a Weatherby before Tikka? But I’m running a Yodave in the meantime,, has me down to 18 oz. 640$ for a bix n Andy is too much.
 
Back
Top Bottom