Titegroup for the 9MM

[Canuck44]

In the process of developing loads using Titegroup for my 9MM. Tried 4.4 and 4.3 gr under Lyman 356402 125 gr cast boolit using wheelweights. Load is warmer than I need. Has anyone tried other combinations with success using lessor amounts. Guns used are my Hi-Power and CZ 85.


Take Care

 

[beltfed]

I'm using 3.7gr. under a 180 gr. tmj in .40 S&W. Around 760fps.
4.6gr. is around max......

 

[buckshot]

http://www.hodgdon.com/data/pistol/9mmluger.php


According to this data from Hodgdon for a 125gr LCN Bullet (Lead Cast ????) the range for Titegroup is 3.6 to 4.0 grains.

 

[gushulak]

I am using 4.1gr Titegroup with a 124gr. Frontier plated FP, Win cases and primers. Out of my Glock 17 it produces 1050fps. Its my favorite 9mm load.

 

[Canuck44]

Titegroup

The Hogdon 2001 manual listed max at 4.4 - such is life in the US with lawyers. Powder burns much cleaner than Unique which is why I may make the move. Trying 3.8 and 4 gr loads over the chrono today.

Take care

 

[reddot]

Can't help you with a load for the 125gr cast bullet...

FWIW my puff load in 9mm is 3.4gr of Titegroup with MG 147gr CMJ.

 

[hoochie]

i use 4gr of titegroup with 115gr target rounds