Toz-78 problem...

muh-muh-muh-mauser

muh-muh-muh-mauser

CGN Regular
EE Expired
Rating - 100%
7   0   0
Location
Ontario, Kanada
Ok, just got one and i was taking it apart to clean and this spring shot out when i removed the action from the stock. Ive cleaned the gun and am ready to paste it back together but i cant figure out how to put the spring back in properly. Ive tried a bunch of different positions but the safety still doesnt work properly. If anyone can help me out id appreciate it alot. Thanks.

idx3xf.jpg


idx660.jpg


I dont know why the pics are so giganto, sorry.
 
Did you take the trigger group off?
If it's just that little paper clip looking affair, grab a pair of needle nose pliers and put it back in. I can take a pic of it together if it will help......
 
Hitzy said:
Did you take the trigger group off?
If it's just that little paper clip looking affair, grab a pair of needle nose pliers and put it back in. I can take a pic of it together if it will help......
Click to expand...

Ya, i took the trigger group off the reciever to clean the grease out of it but that spring in the pic popped out when i took the action out of the stock, i was never able to see it in its original position so i dont know what it looks like when properly installed.
 
Also, don't unscrew the trigger adjusting screws too much or the little nut inside the receiver will fall off.......
It took 2 guys with 4 big mitts and 3/4 of a brain to get it back together again......:)
 
Hitzy said:
Also, don't unscrew the trigger adjusting screws too much or the little nut inside the receiver will fall off.......
It took 2 guys with 4 big mitts and 3/4 of a brain to get it back together again......:)
Click to expand...

I may have heard of this before.....:redface: :rolleyes:
 
You must log in or register to reply here.
Back
Top Bottom