ht tps://www.specialcorps.it/shop-online/tr-1-personal-custom-trigger/beretta-1301-e-a400/
TR-1upgrade® 1301 / A400 COMP and PRO line code: 1000074
The New Release Kit is made with original Beretta components completely handcrafted in the laboratory. Designed and accurate for sport, the system will allow a more fluid and homogeneous pressure in the traction phase and a minimum re-engagement reset to speed up the bank of shots during the dynamic shooting and Steel Challenge stages. Mounting it on a 1301 Comp model you will have, in addition to the high-performance trigger, the 1301 Comp PRO dipper, which stops in a raised position (with cocked bolt), facilitating loading, without the risk of crushing the thumb and without having to modify it.
Its trigger weight can weigh around 936g, but what sets it apart from the original package is its great fluidity and reset.
The TR-1 ® , consists of:
complete shooting package;
WT Carbon treatment (blue or black) with TempCoat ® polymer coating highly resistant to abrasions and scratches;
trigger equipped with a special screw for adjusting the Stop Trigger (already adjusted by the manufacturer);
adjustment Allen key;
The TR-1 ® package contains:
Full shot of the TR-1301
Shockproof / Pressurized box with sponge
Adjustment Allen key
TR-1 rubber patch
Instructions and free sticker
* THE "KIT" can be used with the original firing pin springs and firing pin safety. The trigger package is supplied with the new shockproof waterproof casing and the new TR-1upgrade ® PVC patch FREE OF CHARGE.
Last edited:
