Trigger question

[THESEUS]

Currently putting my Geiseille trigger into the AR lower and I've got the trigger part placed but I'm stuck on the second part.
Do the two spring arms go under the assembly touching the receiver or sit on top of the assembly?
I'm also having issues lining up the pin to the hole to remove the slave pin.
Any tips or techniques?

Thanks

 

[GR0M]

YouTube is your friend. Pretty sure Geissele has how to videos also

 

[hbean]

The legs of your spring sits on top of the pin.

 

[sky52]

Put your old trigger pin in on the right side, when the hole lines up, push it in another 1/4inch. Then drive the Geissele pin in from the left.

I have done hundreds of trigger this way, and its the easiest

 

[FoxAlpha]

Hammer spring on top of the trigger pin. The tension is what helps retain the trigger pin in place.

I'm a little more crude when it comes to placing a difficult to line up pin. Non marring hammer and light taps, never had an issue.