Troy PAR rifles in Canada 2 models to choose from 5.56 and 308

[IRUNGUNS]

Please click picture for link to site

 

[jeremiah111]

Please explain. Is a 16in barrel on a pump gun non-restricted ?

 

[IRUNGUNS]

Yes, it is based on overall length.

Please explain. Is a 16in barrel on a pump gun non-restricted ?

 

[TheCyaba]

Please explain. Is a 16in barrel on a pump gun non-restricted ?

As long as it's over 26 inches overall length you can put a 10 inch barrel on it if you wanted

 

[M4_556]

My order couldn’t be complete?
And the sales team phone number was unavailable.

 

[tommy tong]

Are the flashiders pinned?

 

[Henry Martini]

Are the flashiders pinned?

I see that some folks change them so I assume that they are not pinned.

 

[chanrobi]

Please explain. Is a 16in barrel on a pump gun non-restricted ?

Don't worry, they're coming for these soon

 

[uAJollyRogering]

Please explain. Is a 16in barrel on a pump gun non-restricted ?

Since no one's actually explained it. Only semi auto centerfire have a barrel length requirement to be nr. Manual action and all rimfire only have to meet the OAL rule of 26"

 

[Paul_1982]

Is it possible to put a bipod on the 308 version without interfering with the pump?

 

[alafly]

From the videos on youtube, they are still pinned. But you could remove the pin and change it.

 

[TheCyaba]

What's the reason for the price difference with exchange rate these are 1400ish shipped other retailers have them up for 1800+ are their different versions?

 

[IRUNGUNS]

These is no difference in the rifles... You are paying the same price we sell them for in the US

What's the reason for the price difference with exchange rate these are 1400ish shipped other retailers have them up for 1800+ are their different versions?

 

[Innavedaw]

...You can fit one. Bad angle pic but a 2” Alpha Rail fits perfect on the .223 as below.

My brother in law cut a 2” Alpha Rail down to about 1.25” and it fits and supports his bipod on his .308...I’ll try and snap a pic of his later.

 

[Paul_1982]

...You can fit one. Bad angle pic but a 2” Alpha Rail fits perfect on the .223 as below.

My brother in law cut a 2” Alpha Rail down to about 1.25” and it fits and supports his bipod on his .308...I’ll try and snap a pic of his later.

So I got the 2” alpha rail... but I can NOT seem to attach it? There’s nothing on the inside the little latches seem able to grab on to! It’s thick ribbed material, not flat, on the inside! I have a bipod on the way I just need to figure out how to attach this rail.