Turkish M4 Turknelli Canadian legal magtube

badboybeeson

badboybeeson

CGN Ultra frequent flyer
Business Member
Rating - 97.2%
611   18   5
Location
East ontario
So a few months ago a bunch of new Turkish clones of the benelli M4 started to arrive.
They have the benelli M4 2pc neutered magazine.
As many of you now we make a Canadian legal +1mag tube for the benelli m4
But it does not quite fit on thr M4 clones we tried.
So we made what we call "turknelli +1 canadian legal magtube.
These have started shipping out to clients today.
A few weeks late as we has some QC issues with the cerakote.
But nothing goes out unless it's perfect.
Looking forward to feedback as it comes in.
Shown here the Bear Z4 from @impactoutdoorsupplies
https://www.sjhardware.com/product/turkish-benelli-m4-1-canadian-legal-mag-extension-mk-ii/
[ 20220623_203806.jpg
 

Attachments

  • 20220623_203806.jpg
    20220623_203806.jpg
    106.2 KB · Views: 976
Mine just showed up, and it does not fit my new Canuck Operator elite. If I screw it on until it bottoms out on the internal shoulder it's ~1-1/4" too short. The end of the threads don't even reach the barrel band when the barrel is fully seated. Putting the old and new tubes side by side they're within a 1/4" in length of each other, but the depth of their internal shoulder is way different.
The M4 optics plate I also ordered has a completely different bolt spacing than my Operator as well, so it won't fit either.
Super disappointed.
 
Unholysavage said:
Mine just showed up, and it does not fit my new Canuck Operator elite. If I screw it on until it bottoms out on the internal shoulder it's ~1-1/4" too short. The end of the threads don't even reach the barrel band when the barrel is fully seated. Putting the old and new tubes side by side they're within a 1/4" in length of each other, but the depth of their internal shoulder is way different.
The M4 optics plate I also ordered has a completely different bolt spacing than my Operator as well, so it won't fit either.
Super disappointed.
Click to expand...

I have the canuck operator elite, and wanted to buy this tube as well. Thank you for the review.
 
Unholysavage said:
Mine just showed up, and it does not fit my new Canuck Operator elite. If I screw it on until it bottoms out on the internal shoulder it's ~1-1/4" too short. The end of the threads don't even reach the barrel band when the barrel is fully seated. Putting the old and new tubes side by side they're within a 1/4" in length of each other, but the depth of their internal shoulder is way different.
The M4 optics plate I also ordered has a completely different bolt spacing than my Operator as well, so it won't fit either.
Super disappointed.
Click to expand...

yours were probably shipped out wrong and it was for 'Benelli M4', check package markings and talk to the sales
 
Unholysavage said:
Mine just showed up, and it does not fit my new Canuck Operator elite. If I screw it on until it bottoms out on the internal shoulder it's ~1-1/4" too short. The end of the threads don't even reach the barrel band when the barrel is fully seated. Putting the old and new tubes side by side they're within a 1/4" in length of each other, but the depth of their internal shoulder is way different.
The M4 optics plate I also ordered has a completely different bolt spacing than my Operator as well, so it won't fit either.
Super disappointed.
Click to expand...

What is engraved on magazine tube benelli M4 or turknelli.
Also you have not contacted us that we know of
No emails calls that we can see.
Send all info to sales@sjhardware.com
On a side note. The cunuck is the least comparable/almost clone of the benelli M4
 
vondoom said:
I’m your opinion what is the best quality M4 clone?
Click to expand...

The Rev arms impact R4 is hand down the best on the market.
They are out of Alberta we worked wirh the. For the last 2yrs to perfect the clone .
It's hands down thr best is why it's the only one we sell .
The bear Arms I.poeted by Impact outdoor supplies is the same gun
We-havw sold more then 1000 of thrn
 
Just sent you an email. The markings on the tube say "Turknelli S&J", as does the packaging, so it looks like I was sent the correct tube. You'd think Canuck would copy small details like the mag tube when the important bits are all copied, but I guess not.
I may have to look into an Impact R4. Two is one, one is zero etc.
 
badboybeeson said:
There is no turknelli optics plate only benelli m4
Click to expand...

One of your manufacturer options for your optics plate in your webstore is "Benelli/Turknelli". That's why I ordered one.

Ethan - I ordered the "Benelli/Turknelli" Holosun 508T optics plate for my Operator Elite and the bolt spacing is off by ~3/8". No go.
 
Unholysavage said:
One of your manufacturer options for your optics plate in your webstore is "Benelli/Turknelli". That's why I ordered one.

Ethan - I ordered the "Benelli/Turknelli" Holosun 508T optics plate for my Operator Elite and the bolt spacing is off by ~3/8". No go.
Click to expand...

same here, saw the manufacture option so I ordered,

thanks for the response, waiting S&J to reply my email
 
Unholysavage said:
One of your manufacturer options for your optics plate in your webstore is "Benelli/Turknelli". That's why I ordered one.

Ethan - I ordered the "Benelli/Turknelli" Holosun 508T optics plate for my Operator Elite and the bolt spacing is off by ~3/8". No go.
Click to expand...

Our M4 plate is correct on true clones of the M4 .
The canauk brand is on Gen 4 of there Turkish m4 and still have not got it right yet.
 
You must log in or register to reply here.
Back
Top Bottom