USC45 - Carolyn mccarthy will be triggered

F22_RaptoR

F22_RaptoR

CGN Ultra frequent flyer
Rating - 100%
12   0   0
Location
Edmonton, Alberta
SO for a year I've been waffling on getting a barrel shroud for my USC45, finally decided to go through with it! Got a Grizzly one, and had him knurl the back half, sorta make it look like an Ops Inc can ;)

Also figured I'd show off the new stock I had put on this guy a while back. With all the news of the new bill being read, it's nice to have something nice for a while I suppose :(

23gxpxnh.jpg


wNAYih1h.jpg


d8P0dn8h.jpg


5GgT2Xgh.jpg
 
Last edited:
Looks good. What adapter did you use to attach the AK stock? Also, is the gas block only there for the sight? does it line up perfectly with the factory rear sight?
 
polskadude said:
Looks good. What adapter did you use to attach the AK stock? Also, is the gas block only there for the sight? does it line up perfectly with the factory rear sight?
Click to expand...

Thanks man! I designed the adapter myself, it's pretty close to the HDPS one but without the top section. I cut the folding section off the Zhukov stock and used some steel plates to attach the Zhukov stock to the ACE push button hinge. Then i used a 3d printed piece to match everything up:

6gqm7fwh.jpg


The front sight block is for a front sight only, but it's VERY close to the sight height of the USC45. About 1/8th inch higher. I needed to add a washer to the rear sight to get some extra spring tension, but it's still within the rear sights elevation adjustment to zero it.

bfiles said:
Looks very cool dude!!!!!
Click to expand...

Thank you! :D
 
My wife has one too. 8" genuine HK UMP barrel (made of unicorn horn I hear), Hera Arms grip and ACR folder. Does not get to the range more than 3 times a year but when it does It gets a lot of attention. Just wish I could find some 5/15 Promags. We find the 5/20 form Hera Arms and Promag too long (single stack) and the 5/10 just a bit too short. We are not interested in the full UMP conversion as we are stuck with 5rds anyway.

Moe
 
Last edited:
That is a really cool PC. Very Unique looking. I am going to get one and import the parts to convert to an UMP after i finish the sl8 conversion I am working on.
 
Very nice, I really liked my USC when I had it but couldn't justify the cost of the parts to make it pretty.
How long is your barrel, I've always wanted another USC but with a NR length barrel this time.
 
You must log in or register to reply here.
Back
Top Bottom