Used beretta 96D brigadier what to look for

[Riven]

Im looking at a fairly well used 96D and was hoping for some input from the experts as what to look for before purchasing is as i have NO experience in this area.

I know you should replace the recoil spring but dont know what weight to go with.
Any info on this gun would be welcomed.

 

[enefgee]

Depending on the age of it - cracked locking block

 

[PharoH]

Check the locking block, check the ejection port and the whole slide for cracks, check the frame rails.

I would replace the recoil spring with a factory replacement, or u could upgrade to a steel rod and spring from wolf gunsprings.

That model has a thicker slide from the factory so it should last a long time.

Hope this helps

 

[Riven]

Thanks!
Like I said I dont know $#!+ about hand guns so once i figure out what a locking block is ill be good to go. LOL
Its not a private sale so im thinking the shop gave it a once over but I will absolutely give it a good once over.
A test fire would be preferred but im not sure if thats even remotely possibly.

 

[RCloud]

A locking block cost under $30 and takes about 5 mins to change out, so even if it needs to be replaced, it is not a big deal. Abnormal wear, cracks etc is what I would look for, you might want to remove the grip panles as well.