Using CFE 223 in 7.62x39?

Riven

Riven

CGN Regular
Rating - 100%
40   0   0
Location
Burks Falls Ontario
Does any one have data for using CFE in a 7.62x39? Im going to start loading rife 30-30 & 7.62 shortly but with power options near 0 i was hoping i could find some common use powders between both rounds.

I can get CFE & IMR3031. I have data for both in 30-30 but neither come up for the 7.62.
 
From HANDLOADS.COM:


7.62 x 39, all bullet weights
Bullet Powder Weight Powder Velocity Primer Source
110gr JSP 27.5 gr IMR 3031 2,260 fps Hodgdon
Suggested starting load: 24.8 gr
Max load, 24in barrel.

Pressure: 34,400 CUP
123gr SP 23.1 gr H116 2,250 fps Hodgdon
Suggested starting load: 20.8 gr

125gr JSP 27.0 gr IMR 3031 2,257 fps Hodgdon
Suggested starting load: 24.3 gr
Max load, 24in barrel

Pressure: 37,100 CUP
150gr FMJ 26.0 gr IMR 3031 2,101 fps Hodgdon
Suggested starting load: 23.4 gr
Max load, 24in barrel

Users assume all risk, responsibility and liability whatsoever for any and all injuries (including death), losses or damages to persons or property (including consequential damages), arising from the use of any data, whether or not occasioned by publisher's negligence or based on strict liability or principles of indemnity or contribution. Handloads.Com neither assumes nor authorizes any person to assume for it any liability in connection with the use of any data.
 
You must log in or register to reply here.
Back
Top Bottom