VZ Gremlin Fix - Batch Service

NeitArms

expired Dealer
Rating - 100%
40   0   0
Location
Ontario
A few months ago we discontinued our VZ carrier tabbing service due to limited time available in the shop. We still constantly receive requests for the work.

We have decided to offer this service again at selected batch intervals. We will announce a date that we will run the service and take orders. We will offer payment via our webstore for checkout and will accept a deposit on the service. All carriers will be sent on the batch date and turnaround will be < 7 days.

Having a scheduled time to provide this services allows us to dedicate a block to do the work and offer an acceptable turnaround. We did over 100 tabs in 2010 and we would like to be able to continue to provide the work, however to this point we have been too busy to do the work. This should allow us to continue to do so.

All carriers will be tabbed, and test fired. All worked areas will be reblackened. We will also take the opportunity to offer some additional services at the same time. (Additional services may add additional turnaround time.)

- Carrier stripping and Armacoated in a selection of colors.
- Carrier stripping and Milspec Parkerized.
- Other steel parts Stripped and Milspec Parkerized.

We will announce the Batch dates as well as pricing in the next 30 days once we get through the SHOT show rush.

If there are any other services you would like to request we are open to suggestions.
 
Were you guys still planning on making new barrels for the vz-58? I heard mention of them like a year ago but then the idea faded.
 
Were you guys still planning on making new barrels for the vz-58? I heard mention of them like a year ago but then the idea faded.

Lots has come up and it's not high on the list anymore. We were ready and able to do it and it got postponed for other things. With the new rifles wolverine and marstar are bring in, it's not likely to happen. Why rebarrel when you can get it off the shelf.
 
Yea I was worried that was the case, and I totally understand. Those new VZs are offered with a lot of barrel options now...

For me I just wanted a replacement barrel but no one in Canada carries them. My chamber was cut wrong from factory and I could not get this resolved, so I was hoping some 3rd party barrels would show up.

Occasionally a shot out milsurp barrel shows up on the EE, but I kind of wanted something nice.
 
A few months ago we discontinued our VZ carrier tabbing service due to limited time available in the shop. We still constantly receive requests for the work.

We have decided to offer this service again at selected batch intervals. We will announce a date that we will run the service and take orders. We will offer payment via our webstore for checkout and will accept a deposit on the service. All carriers will be sent on the batch date and turnaround will be < 7 days.

Having a scheduled time to provide this services allows us to dedicate a block to do the work and offer an acceptable turnaround. We did over 100 tabs in 2010 and we would like to be able to continue to provide the work, however to this point we have been too busy to do the work. This should allow us to continue to do so.

All carriers will be tabbed, and test fired. All worked areas will be reblackened. We will also take the opportunity to offer some additional services at the same time. (Additional services may add additional turnaround time.)

- Carrier stripping and Armacoated in a selection of colors.
- Carrier stripping and Milspec Parkerized.
- Other steel parts Stripped and Milspec Parkerized.

We will announce the Batch dates as well as pricing in the next 30 days once we get through the SHOT show rush.

If there are any other services you would like to request we are open to suggestions.

ready when you are!!!! Thanks!!
 
Yea I was worried that was the case, and I totally understand. Those new VZs are offered with a lot of barrel options now...

For me I just wanted a replacement barrel but no one in Canada carries them. My chamber was cut wrong from factory and I could not get this resolved, so I was hoping some 3rd party barrels would show up.

Occasionally a shot out milsurp barrel shows up on the EE, but I kind of wanted something nice.

Talk to Dlask, they may be able to help you out. They've rebarreled VZ's before.
 
Back
Top Bottom