Hey guys,
Looking for some insight into a problem I am having with my Model 4. The magazine, when inserted, is remarkably tight and difficult to remove. I noticed that an incorrect main spring pin had been inserted, and created a "small bulge". I replaced the pin, and "eliminated" the bulge (filed it down gently), but it appears to be rubbing on the main spring ( fairly high )
Here is a link to the schematic http://www.gunpartscorp.com/Manufacturers/Walther-33560/4-42509.htm?page=2
How the heck do I fix this without destroying the value/parts...
ANY IDEAS PLEASE!!!!
I tried to lightly file down the main spring...
Looking for some insight into a problem I am having with my Model 4. The magazine, when inserted, is remarkably tight and difficult to remove. I noticed that an incorrect main spring pin had been inserted, and created a "small bulge". I replaced the pin, and "eliminated" the bulge (filed it down gently), but it appears to be rubbing on the main spring ( fairly high )
Here is a link to the schematic http://www.gunpartscorp.com/Manufacturers/Walther-33560/4-42509.htm?page=2
How the heck do I fix this without destroying the value/parts...
ANY IDEAS PLEASE!!!!
I tried to lightly file down the main spring...
