We've got NOS

Q

Questar2

Sponsoring Dealer
No not the stuff you want to put in your car but New Old Stock from a company reducing their inventory.

We're still going through everything the boss picked up and we'll be releasing more as the week goes along. So far we have;

4 New M305's with synthetic stocks and 1 magazine no case. Just $499.99: SOLD

DSCN0097-1_zpsotsdc24f.jpg


https://shopquestar.com/shopping65/shopexd.asp?id=2844&bc=no

22 New in box Norinco Sportsman M93 pistols with 2 magazines, only $219.99;

DSCN0095-1_zpsgudh8uzr.jpg


https://shopquestar.com/shopping65/shopexd.asp?id=2845&bc=no

SOLD OUT......B]

and for you Canadian collectors 24 Longbranch un-issued No.7 receivers; SOLD

DSCN0121-1_zpsjufktish.jpg


https://shopquestar.com/shopping65/shopexd.asp?id=2846&bc=no

a great piece of Canadiana or the starting point for a build. Only $24.99 each.



So far everything we're seeing is new un-fired and for the most part in the original manufacturer's packaging.

On these items all sales are final and we're not offering any warranty on these and will do our best to descript condition if we find something that isn't new in box.

We'll be adding more as the week goes on so check back daily.

When they're gone they're gone.....
 
Last edited:
I have 2 of Norinco Sportsman M93 pistols for about 5-6 years now. They are great little pistols, Defiantly worth money.
 
I would order one of those but, I have a beretta, ruger and 3 sportowy's , hey Questar, do you want to trade a Norc .22 for a Nos Sportowy ??!! I have a spare, never shot, they are nice looking!
 
Just a piece of advice for anyone thinking of building a .303 off a No.7 receiver, I did a little hunting for information and apparently No.7 receivers weren't heat treated to the same tolerances as No.4 receivers. John at Marstar was given technical information from an armorer stating such. More can be read here: http://www.canadiangunnutz.com/forum/archive/index.php/t-674815.html

Take this "info" for what it is, just be careful if you choose to build such a rifle. Probably wouldn't hurt to hardness test it and compare to a .303 rifle.
 
Don Kael said:
Just a piece of advice for anyone thinking of building a .303 off a No.7 receiver, I did a little hunting for information and apparently No.7 receivers weren't heat treated to the same tolerances as No.4 receivers. John at Marstar was given technical information from an armorer stating such. More can be read here: http://www.canadiangunnutz.com/forum/archive/index.php/t-674815.html

Take this "info" for what it is, just be careful if you choose to build such a rifle. Probably wouldn't hurt to hardness test it and compare to a .303 rifle.
Click to expand...
I never even thought that folks would try that, they are .22 receivers, I would get one if I thought I could find the rest of the gear to put one together, I used to love shooting these in cadets! If there are extra receivers, it makes sense that there should be extra barrels/ bolts etc.,,,, doesn't it!?
 
bobdbldr said:
I never even thought that folks would try that, they are .22 receivers, I would get one if I thought I could find the rest of the gear to put one together, I used to love shooting these in cadets! If there are extra receivers, it makes sense that there should be extra barrels/ bolts etc.,,,, doesn't it!?
Click to expand...

I've seen lots of full rifles in my time, the parts are definitely rarer than No.4 parts though. They are .22 receivers, but dimensionally the Long Branch's are exactly the same as the .303 receiver, unlike the British .22 Lee-Enfields.
 
Here is what we have for today;

2 each Non-Restricted JR Carbines in 9MM and 45ACP;

DSCN0101-1_zpsfjfeuv62.jpg


the 45's

https://shopquestar.com/shopping65/shopexd.asp?id=2850&bc=no

and the 9's

https://shopquestar.com/shopping65/shopexd.asp?id=2849&bc=no


3 Beretta CX4 Strom 9MM Carbines;

DSCN0104-1_zpshmmaqmx2.jpg


https://shopquestar.com/shopping65/shopexd.asp?id=2851&bc=no


2 PARA-Ordnance GI-Expert 45ACP Pistols;

DSCN0087-1_zpsll972jzf.jpg


https://shopquestar.com/shopping65/shopexd.asp?id=2848&bc=no



We're still digging through and will have more up tomorrow.....

Get them before they're gone!!!!!
 
You suck I just bought an ASR for 950$ Would have loved a JR carbine at that price! Grab them here while you can cheaper than EE be 100-200$

How long do you think it will take to get in some 5/5 or 5/10 FNAR mags in saw on your site they were orderable?

I will keep buying from you guys at your prices, Magpul Glock mags cheapest in Canada and fast shipping!!!
 
Foxer2373 said:
You suck I just bought an ASR for 950$ Would have loved a JR carbine at that price! Grab them here while you can cheaper than EE be 100-200$

How long do you think it will take to get in some 5/5 or 5/10 FNAR mags in saw on your site they were orderable?

I will keep buying from you guys at your prices, Magpul Glock mags cheapest in Canada and fast shipping!!!
Click to expand...



Sorry about that:)

We have the magazines on back order and hope to see them in the next few weeks. We never know how many we'll be getting and back orders get filled first.......
 
And the receiving continues........

Today we've got a little something for the cowboy in us all;

DSCN0109-1_zpsgwavt2hc.jpg




First up a Pietta CAS36;

https://shopquestar.com/shopping65/shopexd.asp?id=2856&bc=no

DSCN0112-1_zpsdkat0wfl.jpg




next a RGC44:

https://shopquestar.com/shopping65/shopexd.asp?id=2855&bc=no

DSCN0116-1_zpsbkgemwh6.jpg




and 2 YAN44's; SOLD

https://shopquestar.com/shopping65/shopexd.asp?id=2857&bc=no

DSCN0113-1_zpsignvowh5.jpg




Also a Chiappa 1887 T-Model for those of us who want to play the Terminator. Roses sold separately;

https://shopquestar.com/shopping65/shopexd.asp?id=2852&bc=no

DSCN0108-1_zpsbhitwrth.jpg




and some Yugoslavian SKS's. No these are not New Old Stock, just need to say that;

https://shopquestar.com/shopping65/shopexd.asp?id=2847&bc=no

DSCN0096-1_zps72w4qon5.jpg



And now back to the digging......
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom