What bullet feeder die is best?

[Chrossphyre]

Hornady or RCBS?

 

[Ganderite]

Never heard of such a die.

Do you mean a bullet seater die?

They are all much the same, except Hornady, which I like.

 

[Chrossphyre]

Do you mean a bullet seater die?

What?? I have inadvertently stumped the omniscient Ganderite?? Shockers!! No sir, I mean bullet FEEDING die, as in the die that is used on a progressive press to feed collated bullets to the case mouth from an automatic bullet feeder.

 

[Paul_1982]

Mr. Bullet Feeder die.

I had a Hornady for 9mm that stopped feeding properly 500 rounds in, Mr. Bullet Feeder die is top notch.

 

[madcow]

I use Hornady myself, just need to clean the collets once in awhile

 

[fridge450]

I've loaded tens of thousands of 9 and .45 with my hornady dies with no problems.

 

[madcow]

The key with Hornady feeder die, do not overload the tubes with too much weight

 

[dogzilla]

I use the alpha dynamics mini bulletfeeder. It isn't cheap but it works great. Since I'm lazy I buy extra dies for my quick change plates on my dillon 650. Note that you have to specify which loader you have as the powder funnels are different. They flare the case a little longer with less of an angle so the bullet stays in the case while the head rotates. They ship to canada, and I usually have my order in a week or less.

 

[Trinimon]

I use the Hornady ones too. I polished up the collets and i clean and dry lube them once in a while. I just use plastic tubes to feed bullets into them and each holds 60pcs.

 

[madcow]

I use the Hornady ones too. I polished up the collets and i clean and dry lube them once in a while. I just use plastic tubes to feed bullets into them and each holds 60pcs.

https://www.canadiangunnutz.com/for...g-press-accessories-**Bullet-Feeder-Project**

 

[Trinimon]

https://www.canadiangunnutz.com/for...g-press-accessories-**Bullet-Feeder-Project**

Damn! I need a 3D printer now... lol

 

[Ganderite]

Oh.

I don't like to be the first with a fad.

I still use a manual transmission.

 

[VinnyQC]

I use hornady, haven't tried rcbs and don't really plan to. They have not failed me once. I've made thousands of 9mm and about 2000 rounds of 45acp with them and so far not a single failure.

I have both the automatic case feeder and automatic bullet feeder for my LnL AP and if I had to choose only 1 it would be the bullet feeder. It has almost doubled my production rate compared to using a bully adapter with plastic tubes.