What do you Lube your SKS with: Oil, Grease, Dirt, Spit?

[Coyote Ugly]

Well?

 

[JimboJones]

Break Free CLP.

 

[mardig88]

it is the type of firearm that doesnt require lots of care
only thing really essential is to clean after shooting corrosive

otherwise i use wd40 for the outside and G96 for the indside (cleaning and lubrication)

 

[insurrecto]

Blood!!!

 

[mak]

Mobil 1 10w/30 synthetic..my AR's also

 

[thehulk]

Blood!!!

AHAHA i like that! Ive used Hoppes 9, Break Free clp, and some other oil i bought from canadian tire and have had no problems with the gun and virtually no wear. Just a little paint missing from my bolt carrier. I have one the russian 51's with the black bolt and bolt carrier. To make a long story short i i dont think the SKS really care what lube you use. Try olive oil

 

[Ephemerality]

Blood!!!

There probably IS some traces of blood in mine; I stabbed myself with a screwdriver trying to pry up the gas tube release!
Only thing I've had in it other than that is the H9, seems to work well enough for me.

 

[mwjones]

Motomaster Silicone Spray.

 

[Gibbs505]

lube, don't need no stinking lube!!!..............

 

[Satain]

Although I heard if you spit on it, works too.

Grease what slides and oil what pivot's. Oil generisly & grease lightly.

 

[MosinNagantM44]

Clp or motor oil.

 

[bjs7293]

Check this out, was posted previous but makes a lot of sense. I have not tried the KY yet.....may work better than spit........
http://www.grantcunningham.com/lubricants101.html

 

[cainesy]

PWD, which the British armed forces use, and good old Hoppes No 9, always works for me.

 

[Norton]

0w30 synthetic motor oil and ultra slick synthetic snowmobile grease.

 

[osageorange]

PWD, which the British armed forces use, and good old Hoppes No 9, always works for me.

This is a new one for me. What is PWD and where do you get it from?

 

[The Kurgan]

Rem oil. I use it on all my firearms. Its a nice light oil that eventually dries, especially when the firearm heats up. Never leaves any residue.

On my SKS's I coat every metal part in a thin layer of oil. Never a problem.

 

[RMXC51]

Hoppes 9 and break free CLP.

 

[cainesy]

I buy PWD at my local Napa store, its in a green spraycan and I find it to be the real catsass, costs around 8 bucks.Cheers.

 

[Calum]

I use G96 spray on the stuff that pivots, and some light gun grease on the parts that slide. Or if I have any left I'll use Balistol spray on all the parts.

 

[FMP]

Gunzilla