What is your favourite 6.5x47 Lapua load?

MartyK2500

CGN Ultra frequent flyer
Rating - 100%
278   0   0
Location
Quebec
While waiting on my barrel and action i am reading all i can on this caliber.
There seems to be quite a bit of love for Berger VLDs, H4350 and CCI 450.

What is your favourite load?

My initial tests will be done with Varget, CCI BR4, and 142 SMK.
I already have multiple kegs of varget and many thousand BR4s so i am attempting to streamline my components.
SMKs just because i have sub 1/2 moa 10 shot groups with them in my 308, my IBI barrel loves the MKs.
Figuring of feeding the same diet to new IBI barrel.
 
I have gone back and forth between Varget and H4350 and I am still on Varget. Paired with CCI450 and a143ELDX makes a sweet hunting load at 2775fps with single digit SD and ES.
 
I dont want to say it is over published max.
I found a node at the Hodgon published max and another a little higher.
I was worried it was over pressure but I have 12 PC of brass that have 11 reloads on them with this load and the pockets are still tight.
 
I use cci450s and varget exclusively. Everything from 123 scenars, 130 Berger's, 129 lrab, 127 lrx 139 scenar, 140 Berger to 143 eldx. Works great.
 
130 Hybrids, 37.2 Varget, cci450, Lapua brass. No prob to 1000- 25.5moa
H4350 was good, Varget just a bit better.


I’m impressed,
I didn’t expect Varget to do better than 4350,
I’ll make a quick load dev 20 thous off the lands from 36.1 to 37.5 of varget in .2 gn increments.
In 21 rounds plus a few single lower loads for pressure signs ill have a good feeling if my barrel likes the varget / 142SMK combo
 
Back
Top Bottom