what rings for a CZ 452 with the 3/8th dovetail?

[crunchiespg]

what rings are people using for CZ's with the 3/8th dovetail?

i need some pretty low ones, about 12mm rise as A in the picture.

preferably in steel. and not the burris ones with the huge screw in the side. prefer allen key type..

cost not a huge factor. quality is though. also suggestions of supplier in Calgary area.


thanks

 

[Epoxy7]

Warne makes a nice ring for .22 rifles. They work for both 3/8" and 11mm. I used a pair on a Walther rifle. They're very nice and look like miniature Leupold PRW rings. They might work for you. Seems they are for 1" tubed scopes only.

 

[Levi Garrett]

millet

 

[Grizzlypeg]

Leupolds are holding up fine on my CZ452 American. You mention low. Will your bolt handle clear the ocular on the scope?

 

[crunchiespg]

Leupolds are holding up fine on my CZ452 American. You mention low. Will your bolt handle clear the ocular on the scope?

yes it will. right now ive got 12mm high mounts and the bolt clears with no problem.

 

[BadeaJohn]

I have ordered Leapers Accushot medium rings (RGPM-25M4) from D&L airgun.

They were cheap, so I ordered both medium and high cause I wasn't sure what will work with my scope (Bushnell 3200).

They are good quality, look great on my CZ and fairly cheap.

hXXp://www.dlairgun.com/Leapers-Mounts.html

Great service from D&L also.

 

[Claven2]

I use burris deluxe rings, but if you want trim, check out the talley steel rings. VERY trim.

 

[Silverado]

Buy the CZ rings. Russells has them.

 

[crunchiespg]

Buy the CZ rings. Russells has them.

which ones do they have? on the CZ website it doesnt show any 3/8th rings. only ones for the CZ527 centrefires or for 11mm rimfires.

also, does anyone know of any stores in Calgary stocking the talley rings?

thanks

 

[Claven2]

AFAIK, you order the talley rings from the US. Talley ships to Canada.