- Location
- marmora ontario
Hi I want to scope a sav 24 with a grooved rec'r(barrel) I wont be using a cheap scope. Any reccomendations??? Ps haven't done it before.Rings,possible scope etc. Thanks JITC
what to scope a Savage 24 22/410?
- Thread starter jiminthecorner
- Start date
Had a 0X redot type scope on mine for a number of years. I sighted it in for the .22 and it also worked for the .410. The long eye relief and zero magnification was a great set up for that gun. The only reason I took it off was becuase I put it on my slug gun and never got around to buying another one.
Tim
Tim
Wrong Way
CGN Ultra frequent flyer
I have, in my hand, a simmons .22 mag 4X that came of my .22/20 guage.
Worked perfect, and I put alot of rounds through that gun. The only reason I took it off was to shoot some clays...then I sold the gun. No need to spend a ton on a scope, in fact.....you can have this one for 40 bucks!
Worked perfect, and I put alot of rounds through that gun. The only reason I took it off was to shoot some clays...then I sold the gun. No need to spend a ton on a scope, in fact.....you can have this one for 40 bucks!
x2 for a red dot - have one one my 24C since the day i bought it in 1986 - best grouse set up I have ever used - and once again, doesnt need to be expensive. Lebaroms sells a Tasco for grooved .22 receivers for about $35.00
skeetgunner
CGN Ultra frequent flyer
- Location
- Burlington
Other than a red-dot, something in the 2-7x32 class is probably a good all around compromise, provided that you are shooting slugs with the .410 and not wingshooting clays.
As for rings, have a look at the Burris Signature Zee and Burris Quick Detach line. You can find grooved-to-weaver adapters, from BLK and B-square and then mount your scope with Burris QD rings. QD will let you take the scope off for wing shooting and not have to re-zero when you reinstall it. And the adapter is low enough, you can still use the iron sites with the scope off.
http://www.burrisoptics.com/rings.html
As for rings, have a look at the Burris Signature Zee and Burris Quick Detach line. You can find grooved-to-weaver adapters, from BLK and B-square and then mount your scope with Burris QD rings. QD will let you take the scope off for wing shooting and not have to re-zero when you reinstall it. And the adapter is low enough, you can still use the iron sites with the scope off.
http://www.burrisoptics.com/rings.html
- Location
- marmora ontario
Many thanks guys!! I think a red dot might be just the ticket. I had on on a 10-22 and it was deadly on squirrels. Thanks again JITC
