Where can I find a good .30 cal muzzle brake?

[BabySeal]

I have been searching the net for some time and can find a lot of cool stuff from the states that looks like a good match for my needs, but I can't seem to find anything in Canada.

I am looking for an effective muzzle brake for .308 cal bullets. The brake should have a closed bottom and fit a 5/8-24 thread. The brake also has to be at least 7/8 in outside diameter.

SO just to be clear, that eliminates the brakes of the style of a tube with a whole bunch of holes drilled in it.

Can anyone point me in the right direction?

Thanks!

 

[roberti11]

Brake

Here is a canadian gunsmith, great brakes, decent prices

http://www.grizzlygunworks.com/GRIZZLY_MUZZLE_BRAKE_S_3UXO.html

 

[slick39]

Just out of curiosity, where is grizzlygunworks located?

 

[Haagen_Dazs]

Albera Tactical Rifle comes to mind, but Im sure you've heard of them

 

[BabySeal]

I didn't think that grizzly was Canadian but neither they or NEA advertise a 5/8-24 brake in .30

Also, I have never seen one of those grizzly brakes in person but they are gun-koted aluminum and that doesn't sit well with me for some reason

 

[Tomochan]

I am sure ATRS can make you something. You can also try Near Mfg ( I have on of his on a TRG - excellent ) and maybe Casey at Tac-Ord.

 

[Rugerman]

Dlask arms has a .30 cal muzzle brake on sale for $55. Don't know if this is exactly what you are looking for but it is .30 calibre available with the thread pattern you want, in Canada.

 

[Dave&Dar]

Second vote for Near. I have one on a TikTac that's great. Give him a call, he'll probably tap it in any thread you need. Same for ATRS, I just haven't dealt with them personally, yet.

 

[Rotaxpower]

I got a badger FTE brake put on my 700P it works like a dream. But it is a little pricey. I got it from Wolverine Supplies

 

[pinedweller]

ATRS does a nice Brake. I have one on a 308. I can see my hits and misses and make adjustments. Nice piece of gear.

 

[smokindonuts]

I have a brake on my Rem 700 Tac 20" It used to jump quite a bit before putting on a brake from Kamran at Coretac Solutions. The price isn't bad he can make thread on and clamp on brakes. They are big but they are extremely effective.

 

[BabySeal]

That Badger FTE looks like just the thing. Hopefully I can still get one from Wolverine too!

 

[GunBoy]

Too bad if you in Edmonton area, I could help you out!

 

[slick39]

Too bad if you in Edmonton area, I could help you out!

Details??

 

[BabySeal]

Too bad if you in Edmonton area, I could help you out!

Damn! You look like you should be able to hook me up!

 

[GunBoy]

Just purchase youself some material, I even show you how to do it, some of these are 5/8=24TPI, while smaller one are 1/2-28, larger one are 3/4-24tpi, some larger one are M18X1 fit sako or Tikka Tac. I make them for pass time. kind of hobbies.
5/8-24TPI 300WinMag

M18X1 308win

5/8-24TPI rem700 MLR

 

[MANDOG]

gun stuff that gunboy does is the best you can find in ALBERTA IF NOT IN CANADA . AAA top of the line

 

[BabySeal]

Just purchase youself some material, I even show you how to do it, some of these are 5/8=24TPI, while smaller one are 1/2-28, larger one are 3/4-24tpi, some larger one are M18X1 fit sako or Tikka Tac. I make them for pass time. kind of hobbies.
5/8-24TPI

M18X1

5/8-24TPI rem700 MLR

I love the bottom one

 

[Husa-Monster]

Hey GunBoy, how much larger than the bullet size do you drill the exit hole?

 

[flipincanadian]

Hey gunboy, where are you located?