Will RCBS dies fit in a Lee Press?

[Alfonso]

I just acuired a set of RCBS dies for 8mm Nambu. Will these work in a Lee turret press or single press?

Thanks

 

[Rocket Surgery]

Most likely

 

[deadeyes40]

if they are 7/8 inch diameter with 14 threads per inch they will.

 

[chappy]

bolt right in. all the 7/8 dies are interchangable. lee rcbs redding etc

 

[BCboy]

yup!

 

[f55]

I just acuired a set of RCBS dies for 8mm Nambu. Will these work in a Lee turret press or single press?

Thanks

I have a single stage lee press, with lee,redding and rcbs dies, all require bushings, which are standard thread and the bushings then fit in the press.

h t t p://leeprecision.com/xcart/Breech-Lock-Quick-Change-Bushings.html

 

[subneural]

Yes. I run RCBS carbide pistol dies in a Lee 4-hole turret. Works good.

I have also run Lee dies in a Rockchucker press. I have yet to try Lee dies in a Lee press....go figure!

 

[deadeyes40]

i have used lee and rcbs dies in my lyman single press with no problems.i also have a bunch of other dies that take a bushing in order to fit the lyman press but screw right into a small hand press.

 

[Alfonso]

Thanks for the feedback folks. Now all I need to do is track down some Nambu 8mm from somewhere!