Will this ADM mount work with Burris scope / Tikka T3?

[Brianma65]

I have a Tikka T3 with a 20 MOA rail(EGW). I've ordered a Burris Veracity 3-15x50 and was wonder if this ADM will work? [


ATTACH]47332[/ATTACH]View attachment 47330View attachment 47331

 

[bsand]

Should work with about 5mm gap without caps.

The math is pretty simple.

Your OD of objective lense divided by 2 = MINIMUM height of rings, if you are running bulter creek caps, add 3mm, if you have a cant'd rail add more (0.89mm is 20MOA on 6" rail).


44.25mm / 2 = 22.125 mm + 3mm for caps + 0.89mm for rail = 26.015mm. Your mount has 28.194mm of room.

Your Mount - Scope = if number positive Your good, = if number negative wont work.

So 28.194mm - 26.015mm = + 2.179mm

 

[Brianma65]

Thanks , the scope will come with caps so I'll probably wait and make sure. I thought it should work but wasn't 100% sure.