Hi guys...I had this posted over in the gunsmithing forum but there's just not as much traffic there...
So the long of it is that I bought a 12 gauge 120 ranger in great condition but it needed a really good scrubbing of the internals. Took down the bolt assembly, cleaned and reassembled with no issues. The trigger group looked real grimy so I took that down and cleaned it up. Upon reassembly, I can't get the trigger in without it stopping the safety from locking up. Anyway, ive been at it for awhile and seen all the terrible YouTube videos regarding reassembly and they're of no use. I'm hoping one the members here might be able to assist...
Thanks fellas
So the long of it is that I bought a 12 gauge 120 ranger in great condition but it needed a really good scrubbing of the internals. Took down the bolt assembly, cleaned and reassembled with no issues. The trigger group looked real grimy so I took that down and cleaned it up. Upon reassembly, I can't get the trigger in without it stopping the safety from locking up. Anyway, ive been at it for awhile and seen all the terrible YouTube videos regarding reassembly and they're of no use. I'm hoping one the members here might be able to assist...
Thanks fellas
