Winchester cooey 64 extractor

[sorcerer13]

Hi,
I'm trying to locate an extractor for my Canadian Cooey 64. I've searched many sites and either they don't carry it or been sold out for ever. Any help would be appreciated. This is what I'm looking for: https://www.apexgunparts.com/winchester-64-cooey-extractor-and-spring-gd.html

Thanks

 

[Raton57]

You try the place in Bonneyville Alberta think it's JRs

 

[270 totheend]

The link you have shows an extractor unlike the Cooey 64. I suggest you double check with some other sites to ensure you get what you need.
https://www.mcarbo.com/.Exploded View/savage-64-exploded-view-webopt.jpg

Savage 64, Cooey 64 and I believe Lakefield 64 are all the same. I only have two Cooey, including my first rifle under the Christmas tree in ‘75.

 

[gunrunner100]

The link the OP has is for the original Cooey 64. The link above is for the 64B.

 

[sorcerer13]

Yes, I definitely need the original Cooey 64 extractor.

 

[270 totheend]

While trying to find an original diagram for the plastic mag Cooey I found a conversion article from Paladin press to make a Cooey 64 with a three position safety.
https://www.tiropratico.com/manuali-pdf/W/Winchester_64_and_490.pdf
What a surprise, if only I lived in a country that was reasonable when it comes to guns.

 

[Bill Johnson]

Try Darren Roufosse d.roufosse@eastlink.ca. He should be able to help you

 

[sorcerer13]

Great, thanks!

 

[Riven]

I'm after the same part.
Currently trying to fabricate my own. Almost have it sorted I think. Getting the ends exact is tough.

 

[tiriaq]

Have you tried Western Gun Parts?

 

[sorcerer13]

Yes, but with no luck.
Hey Riven, any luck yet with your project? I was thinking the same thing. Did you use spring steel??

 

[Riven]

Yes I used spring steel. Some luck. On my 3rd try,? Getting everything formed properly by hand is a bit challenging. I still need to rework the claw geometry.
I tried some coil spring that I got from work with no luck. Then I found a piece off of the brush from a street sweeper. Perfect thickness and better quality I think as well.
Was also told to try a Sawzall blade

 

[Meroh]

Dr.Deals have them in stock. https://doctordeals.ca/product/savage-lakefield-cooey-64-part-82-extractor-new-used/

 

[Riven]

Thanks. Got some parts from them all ready but mine is a 64A. Those new extractors won't work unfortunately.

 

[ChewyChewbacca]

I got a brand new extractor for my 74 from this fellow.
His name is Darren. +1 (604) 250-1136