Winchester HS hulls

[mbogo3]

Is there data available for loading these hulls as they are different than the older AA I understand? In particular 28 gauge and .410 bore.Claybusters makes an HS wad just need data...........Harold

 

[EvilDezel]

What powder?

Hogdon online manual has lots of data.

 

[mbogo3]

I think 571 is factory for Win.Killer in 1 oz 20 gauge loads and 1-3/8 2 -3/4" baby magnums for the 12 gauge.It was designed for the 10 gauge I think?.........I can always buy other powder if need be............Harold...something for HS Hulls

 

[EvilDezel]

12 and 20 guage?

 

[EvilDezel]

ht tp://data.hodgdon.com/shotshell_load.asp


Remove the space. This has data for Winchester, IMR, and Hodgon powders.

 

[zelly]

just make sure you use high strenth wads. if you dont the shells will be duds.

 

[EvilDezel]

In 12 gauge I just use the regular CB-1100 wads and 700X with the HS hulls and don't have a problem.

AFAIK, you will need the HS wads for 28 and .410. This is my experience with them.

 

[zelly]

sorry i didnt know that. i made some 410 without the hs wads. wow did i ever waste those hulls

 

[mbogo3]

I have a lifetime supply of the old AA 20 +12 gauge hulls.Not a lot of .410 pr 28 gauge.............Thanx for the website.............Harold.........Claybusters makes a cheap generic WAA28 HS and .410AAHS as well

 

[EvilDezel]

I have a lifetime supply of the old AA 20 +12 gauge hulls.Not a lot of .410 pr 28 gauge.............Thanx for the website.............Harold.........Claybusters makes a cheap generic WAA28 HS and .410AAHS as well

Np.

 

[EvilDezel]

sorry i didnt know that. i made some 410 without the hs wads. wow did i ever waste those hulls

Buckle them did ya?