Winchester SXP Extreme Defender magazine tubes

[badboybeeson]

A while a go we had a few of the spx and our Remington mag tubes fit, but it seems this is not always the case
so we have looking at making some for the spx with the 18.5 inch bbl, inc the SXP Extreme Defender .
How we would do it is to have the mag come flush to the muzzle NOT to the end of the breecher choke
If we have it right , it should still hold 2 more rounds.
who would be up for something like this?
here is the gun we are talking about

 

[Daeo]

I've been looking for a +2 mag tube extension for my SXP.

 

[twistedbrilliance]

I would be interestedh

 

[diablo_man]

Count me in.

 

[Dave966]

Will these fit the sx3?

 

[crenom]

My SXP Defender could definitely use a couple more rounds.

 

[My Third Eye]

I'd get one for the regular SXP defender if it works.

 

[cycoblade]

Yup yup

 

[badboybeeson]

Will these fit the sx3?

That I do not know

This is the reason why.
Winchester does not make anything anymore, and has not for a very long time, now that it is owned by the group those owns FN, benelli beretta, stoager, one shot gun may be made in turkey, the other modle made in Italy.

The win spx 3 and the browning gold? I think it is are the same gun, just ones $400 more, forgive me if I get the browning model wrong its been a 4yrs since I worked In a gunshop that sold hunting guns.

Also something to remember, is that just because the threads fit does not mean that it will work, mag tube has to seat at the right on the factory tube with little to no extra threads in order to stop the follower and spring for snagging.

only way to know is we would have to buy the gun and test it

 

[1300_stainless]

Will there be a plated model for the marine model defender/extreme defender?

Will there be no jam follows for this application as well?

 

[badboybeeson]

Will there be a plated model for the marine model defender/extreme defender?

Will there be no jam follows for this application as well?

Yes and yes.
But...
The only finish like that we can do is satin electroless nickle finish, I.E what a remington 870 maring magnum looks like.
Would that work?

 

[Blegend]

That I do not know

This is the reason why.
Winchester does not make anything anymore, and has not for a very long time, now that it is owned by the group those owns FN, benelli beretta, stoager, one shot gun may be made in turkey, the other modle made in Italy. ...

Stoeger group owns Stoeger Benelli beretta etc, Winchester is owned by Browning no? At very least they are distributed by Browning.

 

[1300_stainless]

The only finish like that we can do is satin electroless nickle finish, I.E what a remington 870 maring magnum looks like.
Would that work?

I think so. The finish on the new Marine models is matte and looks similar.

The SXP uses the plastic cap with teeth inside the mag tube to retain the cap (Like an 870 express). Will the extensions just be screwed on tight with some thread lock, or is there a locking device?

 

[badboybeeson]

Stoeger group owns Stoeger Benelli beretta etc, Winchester is owned by Browning no? At very least they are distributed by Browning.

Yes and they are all owned by FN Hursal
BBB

 

[Comanche]

Did this go any where? Looking to extend on an SXP UD for additional 2 shells.
Thanks

 

[BobbyB]

SX Defender tubes

I'm in!!

 

[badboybeeson]

we stoped makign the sxp tube as to many Inconsistency with the sxp, they have made 3 or 4 turkish companies making them as they keep changing the spec in the threading, we got so many returns it was just not worth out time

 

[vp6111]

A disappointed owner of one here. Couldn't even return it as the vendor closed down. A nicely finished scrap metal unfortunately.

 

[FatMango]

we stoped makign the sxp tube as to many Inconsistency with the sxp, they have made 3 or 4 turkish companies making them as they keep changing the spec in the threading, we got so many returns it was just not worth out time

shame... what if i shipped my tube prepaid to you? any still laying around?

 

[jmichelin84]

I have a SXP ultimate defender with the muzzle brake I'd like to have a mag tube to either match the length of the barrel or the brake can you guys supply that?