Hey all, recently picked up a used Wingmaster, while in the process of trying it out had a few issues. Occaisonally the gun would ftfeed a shell from the magtube- not shortstroking as the trigger would be reset, but no shell in the chamber. A couple of times, the gun would double feed- as in two shells would be released from the magtube on to the lifter. These malfunctions happened maybe 6 to 10 times out of around 200 rounds. Rounds fired were Federal bulk, Winchester bulk, and Winchester "heavy game loads" #2 shot. Any ideas?
Wingmaster issues
- Thread starter HeVGunner
- Start date
ipscgraz
CGN Ultra frequent flyer
I had a few FTF due to my lack of maintenance.
Remove the trigger assembly; cycle the slide back and forth slowly and you will see the action bars allowing the next round in the magazine to feed onto th e shell lifter. Clean the crap out of them and lubricate sparingly.
I used a spray bottle with varsol but this is just my thing...
Remove the trigger assembly; cycle the slide back and forth slowly and you will see the action bars allowing the next round in the magazine to feed onto th e shell lifter. Clean the crap out of them and lubricate sparingly.
I used a spray bottle with varsol but this is just my thing...
- Location
- East ontario
Shell latches. 99% of the time
