Won't be doing that Again!

gnmontey

CGN Ultra frequent flyer
GunNutz
Rating - 100%
123   0   0
Location
AB
Today I decided to cast some TC Maxi-Ball. I drained my pot and added a hodgepodge of Maxi-Ball and Maxi-Hunters I had, a box of round ball I never get around to shooting and some clean soft lead.

Well, did that mix ever smoke. Thick black smoke for over a 1/2 hour. Smoke was visibly being exhausted out my exterior vent and was wafting across the back yard. The Bore Butter from the Maxis refused to burn off and had left what looked like a black oil slick floating on top of the molten alloy. I finally got frustrated with it and skimmed off the oil slick stuff. The smoke calmed down after that.

Once the stuff I skimmed off cooled down it turned into something black and really hard? Almost like a plastic? Carburized what?

Guess I should have burnt/melted the lube off the Maxis with a propane torch outside before attempting to melt them?

Very strange stuff.

M
 
Last edited:
I do that all the time, but now outdoors only. Some of the scrap I melt down has real nasty smoke. I get upwind and light it on fire.
 
Poking now at the black sludge again, it's more like a very very thick tar. Not as hard as I originally though when poking at it with the ladle.

M
 
Back
Top Bottom