Xcr bolt jamming

I would guess your barrel is misaligned in the receiver. I'd try and loosen the barrel retainer bolt and rotate it to the charging handle side and see if the bolt falls into battery then tighten the bolt down
 
Use an allen key and remove the barrel where your bolt enters the chamber that is a screw on part.

Could it be slightly undone causing an indexing problem for the bolt?

This is the part I'm talking about.
http://www.xcrforum.com/forum/attachments/6168d1369541314-xcr-m-brand-new-trouble-fte-jamming-d###xddd.jpg
 
I can get it into Battery if I move the bolt slow, If I use the bolt release it jams. I've tried some oil and checked the barrel was seated 10 times.
screenshot tool
You can see where the bolt is hitting the barrel.
I tried my 223 bolt in the 7.62 barrel to see if it would jam, no problems.
 
Last edited:
I adjusted the ejector and get it to go into battery most of the time. If I hold the rifle vertical it still gets jammed every time, so there still something wrong. I haven't had a chance to fire it yet since adjusting the ejector.

Edit; got back from the range last night could t get one round to feed. I'd say she's fuked
 
Last edited:
I sent you an return number by e-mail. Something is defiantly wrong and I will take care of it for you. Any questions someone may have please feel free to send me an e-mail (david@wolverinesupplies.com) and I will get you an answer.
 
You must log in or register to reply here.
Back
Top Bottom