M M.w.wolf CGN Regular Rating - 100% 27 0 0 Jan 12, 2013 #1 Loaded a laser boresighter into my new XCR. It won't extract now. The bolt won't pull back to extract. It will come back a approx 1/4" at most. It was cycling dummy rounds no problem before. Any suggestions?
Loaded a laser boresighter into my new XCR. It won't extract now. The bolt won't pull back to extract. It will come back a approx 1/4" at most. It was cycling dummy rounds no problem before. Any suggestions?
Stevo CGN Ultra frequent flyer Rating - 100% 125 0 0 Location NW Alberta Jan 12, 2013 #2 Hold the charging handle against the edge of a post or your work bench and give it a good push.
xBrokenswordx Regular EE Expired Rating - 98.6% 68 1 0 Location Calgary, Ab Jan 12, 2013 #3 You could try a rubber mallet or stomping on the charging handle with your foot! It works for m14
M M.w.wolf CGN Regular Rating - 100% 27 0 0 Jan 12, 2013 #4 Thank you. Problem solved. Always a little hesitant to use force on a new gun, but worked like a charm. MW
Thank you. Problem solved. Always a little hesitant to use force on a new gun, but worked like a charm. MW
