Your favorite 270 win. loads in TSX

[smacdonald]

I am trying the TSX 140 gr. in my 270 and am looking for some load suggestions.

 

[Lefty Dick]

Try Either 4350(IMR or H), IMR4831, H4831, RL22, IMR7828, H1000.
Try going to a couple of the powder manufactuerers websites for data.
Dont mix your brass choose a primer that gives you top accuracy.
The best advice I can give you is you will have to tinker a bit to find what works best in Your rifle, because what works good in mine or even Bob next door might be un suitable in your rilfe for many reasons such as safety, and or accuracy.
Sorry bud but there is no short cuts to finding what works best in a given rifle short of time at the range.
Try these links:
http://www.hodgdon.com/
http://www.imrpowder.com/
http://www.alliantpowder.com/
http://www.barnesbullets.com/tsxguidelines.php

 

[john-brennan]

270

H4831 works well for my old 270, i now shoot a 270WSM using Retumbo and the 140 TSX.

 

[Scott_N]

There are quite a few powders that you could choose from, but I've had good results with a stiff charge of IMR 4831. I've chrony'd 140 Nosler BTs right at 3000 fps with good accuracy. Comparing loads in a couple of different reloading manuals will give you an idea of where to start, then work on a load that works well in your rifle.

 

[Eagleye]

I have been using Vihtavuori N165 with great success in my 270 with the 140 grain slug. Good velocity and very nice groups. Start at 57 and work up carefully. Should top out at 60-61 grains. Regards, Eagleye

 

[smacdonald]

Try Either 4350(IMR or H), IMR4831, H4831, RL22, IMR7828, H1000.
The best advice I can give you is you will have to tinker a bit to find what works best in Your rifle, because what works good in mine or even Bob next door might be un suitable in your rilfe for many reasons such as safety, and or accuracy.
Sorry bud but there is no short cuts to finding what works best in a given rifle short of time at the range.

That is the truth.

I am just looking for a starting point, loads that work and I can tweek to my own gun.

 

[Lefty Dick]

You'll have to surf those links, Take a starting load from any of the data, and work your load, up.(see Barnes' site link)

 

[beretta boy]

Long time Hodgdon's fan. H-4831 in the .270 with 130's.
Start at 55 gr. and work up, half a grain at a time. Max. is
supposedly 62 gr. of H-4831, but I've found 58 gr. to be ideal in
one .270 and 60 gr. in another.