Zastava M70 375 H H

Heaviest caliber for the M70 PSS stainless synthetic is 9.3x62. See p.8.

http://static.shop033.com/resources/E5/160997/Other/Catalogues/Zastava/Zastava%20Arms%20Catalogue%202012.pdf

I have one in 308. :)

38724923771_17e3f403b8_b.jpg
 
Last edited:
I have owned a 375 ruger for 3 years.i reload for it ,and it is the best shooting gun I have ever used. Taken moose at 250 and 320 yards with 260 gr. Accu bond bullets. Headed to Africa in May for Cape buffalo. And it kicks no worse than a 12 gauge. Big slow push.
 
I emailed tradex a year or two ago and they stated that no more Stainless Zastavas would be imported. Can anyone confirm this?

Fuzzy
 
zastava will not produce stainless rifle or barrel up to new help ... that stainless idea was coming from remington when they were working together ...

Baribal will tell you more about it.
 
I picked up a used Synthetic Stainless in 9.3x62, was very rough, worked it and polished a bit, seems smooth enough now, I also saw a difference in feeding round nose Seller and Belloit compared to the same grain in the more pointed Hornady, the Hornady feeds much better. The rifle came with bases and no scope when I mounted a scope I discovered the front base was for a Winchester 70, so too high, a little curious how the previous owner shot it. I added a limbsaver and a Nikon 1-4. Hope to shoot this weekend.
 
I also have a SS 9.3x62 that will not feed the second rnd. of 285 grn.RN - PPU factory but feeds same grn. pointed just fine. I think I will pull the factory bullets and insert ? I have a box of 250 PPSN Woodleigh on the way. Should I dump the powder or just seat the WL's in ?
pounder
 
pounder said:
I also have a SS 9.3x62 that will not feed the second rnd. of 285 grn.RN - PPU factory but feeds same grn. pointed just fine. I think I will pull the factory bullets and insert ? I have a box of 250 PPSN Woodleigh on the way. Should I dump the powder or just seat the WL's in ?
pounder
Click to expand...

I'd have a look/feel at the feed ramp area. That might be cause of fail to feed.
 
The 2nd .rnd. does not make it to the feed ramp it seems to be in the feed rail. I don't want to play with that, so I will pull the bullets and replace them with a better one. That feeds very well without any problems.
pounder
Zgk0PbX.jpg
 
You must log in or register to reply here.
Back
Top Bottom