Zeroing Millett Tac-1 scope

[Denn0001]

I have my Millett Tac-1 scope mounted on my Tikka T3 SS Varmint rifle (.223 cal.) It is an excellent scope and I had it zeroed in at 100 yards. The turrets are supposed to be able to be set to zero by loosening a screw on top of the turrets once the scope is ranged in. I loosened the set screw on the elevation knob and tried to lift it and rotate to zero but it just cliked away and now I have to re-range the scope by firing at the range. Does anyone have this scope and how do you set the turrets to zero once it has been ranged in?

 

[Max Owner]

Can you lock the turrets in place with a collar?

I have the LRS model in a 6X25. You need to use some finess aswell.

 

[Denn0001]

I hadn't unlocked the collar as it turns out. My gun store showed me how to do the zeroing. I wish they were a bit more specific on the instructions. By the way. How do you like the 6-25x Max Owner? I have the 6-16x. Thanks guys.

 

[Max Owner]

I've only shot mine at 100 meters on a 338 Lapua magnum.

The clarity deminishes once you get over 20X to 22X power. Hope to get my set up out to 2,000 yards in the near future.

 

[Denn0001]

Good luck. Sounds like quite a rifle and thanks for the advice on the extra power and sight image.