Anyone used a Hornady Lock n Load AP before?

S

saxsaxsax

Regular
Rating - 100%
29   0   0
Location
GTA
Hi all,

I bought a second hand Lock and Load AP and I'm in the process of setting it up...but it's giving me more problems than I thought...I was wondering if anyone in the GTA region could give me a hand? that would be HUGELY appreciated! I don't mind paying for your time!!


problem: brass feeder won't feed onto ramp at all, the feeder also jams up on the cam wire, and other problems too....

Thanks so much in advance!!
 
Have you checked out the set up video on the Hornady site? It is very helpful. It will take plenty of tweaking but once you identify problems and resolve each the machine starts to show its abilities. Be patient, be thorough and you'll get it sorted.
 
I'm running a LNL AP I picked up earlier this summer. I don't have a case feeder so I can't help you in that part.

Check out some troubleshooting youtube vids:


This guy's tips are pretty good too...

 
I checked out so many videos on you tube and as well as the official set up videos...but after another of messing iwth it I still cant seem to get it to work...
 
You can call Hornady as well and if they determine you cannot fix the issue via adjustments, they will replace whatever parts you need to fix the issue free of charge.
 
CeeZer said:
You can call Hornady as well and if they determine you cannot fix the issue via adjustments, they will replace whatever parts you need to fix the issue free of charge.
Click to expand...

I agree! Hornady's Tech line is extremly helpful. I had a customer that had issues setting up & they spent tons of time with him & sent replacement parts for free.

Regards, Henry
 
You must log in or register to reply here.
Back
Top Bottom