Cadex Chassis Systems: Post your pics, questions and answers here!

Hi everyone I just got an Urban strike cadex chassis and I wanted to know how many inch pounds are recommended to bolt the action down on the Cadex chassis. my chassis did not come with a manual or I would have check there first.

Thanx
 
WAREWOLF said:
Hi everyone I just got an Urban strike cadex chassis and I wanted to know how many inch pounds are recommended to bolt the action down on the Cadex chassis. my chassis did not come with a manual or I would have check there first.

Thanx
Click to expand...

I believe mine said 65 inch pounds for my field strike.
 
Anyone know what height rings you need for a 50mm objective NF optic to clear the top rail?

Just scored an Field Tactical, and I'm thinking about the PRS being a limit with the cheekpiece. Might need to remove the front part of the top rail and run as low of a ring as possible to prevent chin-weld.
 
who has put an MDT LSS on their Tikka T3 with synthetic stock?

What tikka stock did you start with and what did it weigh before and after the chassis conversion?
 
Thanks Mister Donut. I read somewhere on this thread that Patrice wants us to order from dealers rather than from his website hence my question.
Looks like I'll be ordering out of province.
Cheers!
 
Last edited:
Sorry to ask again... Anyone know what height rings you need for a 50mm objective NF optic to clear the top rail?

Just scored an Field Tactical, and I'm thinking about the PRS being a limit with the cheekpiece. Might need to remove the front part of the top rail and run as low of a ring as possible to prevent chin-weld.
 
Figured it out... TPS High rings are PERFECT fit for a 50mm objective NF.

2014-12-09%2021.29.47_zpscikpcpbc.jpg
 
Here is mine. The action is Tikka t3. The Chassis is Cadex strike lite in OD. I'm sorry for crappy photo as it took with my old iphone 4.

7FD2761A-4D2C-4BB6-9543-4C9B1E644C6F-3149-000005F8E877B83D_zps96ff1a90.jpg
 
You must log in or register to reply here.
Back
Top Bottom