Chiappa Little Badger AR Stock?

RobertMcC

RobertMcC

CGN Ultra frequent flyer
Rating - 100%
198   0   0
Location
Martimes
Has any one try to put a AR15 stock adapter on them. I know the wire stock is held in by a plate.

But those 2 bolt AR15 buffer tube adapters kinda looks like it might be the same length between and longer bolts would work how the stock attaches. Giving you the option of a AR15 stock.

Has any one else thought of this? or attempted?
 
Im either buying a Cricket pistol, Or I was going to do something with a Little Badger.

I kinda wanted a shorter barrel 22LR Single shot and the challenge of a shorter barrel at 100yards.
 
It was a tapco 10/22 stock, I cut the plastic buffer tube to match the lil'badger in the position i wanted, then I used a threaded rod that That I put in the stock mount holes, and drilled into the buffer tube.

I then deem eked the grip,to slide over the rail and attached it all together.

Not pretty, but a fun drunken project.
 
Daver_II said:
It was a tapco 10/22 stock, I cut the plastic buffer tube to match the lil'badger in the position i wanted, then I used a threaded rod that That I put in the stock mount holes, and drilled into the buffer tube.

I then deem eked the grip,to slide over the rail and attached it all together.

Not pretty, but a fun drunken project.
Click to expand...

Kinda the idea I wanted to do. But using a AR buffer tube adapter.
 
Daver_II said:
It is a fun project, but not really worth the effort.

The gun is perfectly functional as is.... But by all means, have fun.
Click to expand...

Whats the length of the badger from the muzzle to where the stock goes in end of the receiver? IE w/o the wire stock. Trying to figure if its worth the whole restricted cricket pistol, or NR short barrel rifle.
 
RobertMcC said:
Whats the length of the badger from the muzzle to where the stock goes in end of the receiver? IE w/o the wire stock. Trying to figure if its worth the whole restricted cricket pistol, or NR short barrel rifle.
Click to expand...


I am not sure, I think it is 22" but don't hold me to it.

I think that I measured it and 26" was about half way down the wire stock.
 
RobertMcC said:
Has any one try to put a AR15 stock adapter on them. I know the wire stock is held in by a plate.

But those 2 bolt AR15 buffer tube adapters kinda looks like it might be the same length between and longer bolts would work how the stock attaches. Giving you the option of a AR15 stock.

Has any one else thought of this? or attempted?
Click to expand...

Why??...
 
You must log in or register to reply here.
Back
Top Bottom