My M93 always had a fairly smooth trigger (amazing eh). The last 300 rounds or so it would sometimes be smooth, usually rough, and the odd time require a strong pull to get it over the last hump.
Basic take down last night. Once slide was off I put a mag back in and pulled the trigger to release the hammer (sadly missed seeing how the mechanism functioned)
Does not seem to work quite right now. Had tried putting her back together, but the slide is stuck forward (wont rack back) once assembled. When apart I cant figure out how the trigger bar and sear supposed to function together with my current set up.
Please see my image below.
With a mag in, the first piece moves out of the way allowing the trigger bar to move.
The trigger bar seems to be in place like it should be. Moving forward when pulling the trigger.
The sear piece is able to move left and right on its shaft about an 1/8", is this right? What would keep it centered/offset in the right place? Likewise it does not seem to interact in any sear like fashion between the hammer and trigger bar.
https://lh4.googleusercontent.com/-1HQyjea0bnA/VLqc_rzKpOI/AAAAAAAAAC0/wVHa_WvKvL4/w422-h534-no/m93%2Btrig.jpg
Basic take down last night. Once slide was off I put a mag back in and pulled the trigger to release the hammer (sadly missed seeing how the mechanism functioned)
Does not seem to work quite right now. Had tried putting her back together, but the slide is stuck forward (wont rack back) once assembled. When apart I cant figure out how the trigger bar and sear supposed to function together with my current set up.
Please see my image below.
With a mag in, the first piece moves out of the way allowing the trigger bar to move.
The trigger bar seems to be in place like it should be. Moving forward when pulling the trigger.
The sear piece is able to move left and right on its shaft about an 1/8", is this right? What would keep it centered/offset in the right place? Likewise it does not seem to interact in any sear like fashion between the hammer and trigger bar.
https://lh4.googleusercontent.com/-1HQyjea0bnA/VLqc_rzKpOI/AAAAAAAAAC0/wVHa_WvKvL4/w422-h534-no/m93%2Btrig.jpg
